Advertisement
Instructions for kit #DH77K
16. Pre-assembled windows and Door
Pull the pin out of the bottom of the Door to disassemble it for painting
(save the pins or use a cut-off of a paperclip to replace a lost pin). Take out
the Door Top and plexiglass.
Make a card the size of the plexiglass (one for the door, one for the win-
dows) to mop up any paint that gets in the grooves before it dries. Do not
have the mop in the groove while painting or leave it in as the paint dries.
Install all the painted Windows and Door in their openings.
Glue Pediments and Stool Caps to the Windows
17. Trim. Glue and tape painted
square corners, the side first then the front.
Optional: Glue and tape
corners. Make sure vertical lines stay in-line and
straight from floor to floor.
3
/
" Stripwood
16
Cross section view
from the top
(see "Painting" page 9)
Stool Cap
7
/
Stripwood to
16
3
/
Stripwood to the angled
16
Pediment
Un-trimmed corners have a more contemporary
look and trimmed corners are more traditional, but
look at the house and test the look before gluing
on the trim to get the look that you want.
page 20
7
/
" Stripwood
16
Advertisement
