Download Print this page
Real Good Toys Bigger Best1 Quick Start Manual

Real Good Toys Bigger Best1 Quick Start Manual

Dollhouse wiring set

Advertisement

Quick Links

The
Bigger Best1
the best quality products of what you need for wiring an 8-12 room house
a Quickstart Guide
Begin with Confidence!
• 12 volt wiring systems are safe to work on and to use.
• Dollhouse wiring skills are easy to learn.
• www.dollhousewiring.com has photos and support for
your wiring project.
Parts in the
Bigger Best1
CK-1009D 40watt Power Supply for up to 65 dollhouse lightbulbs
EL-66 electrification tool is a superior tool for making electrical
connections (Bonus: includes a 1.5mm Drill bit)
E-247 Jack and Plug make a robust connection to dollhouses with
foundations (Bonus: a Connection Wire is soldered to the jack)
Layout Stick for marking wiring runs in 1" scale dollhouses
CK-1023 Small Hollow Eyelets (80) make electrical connections
CK-1023-2 Large Hollow Eyelets (40) to make a receptacle for
large-sized plugs that come pre-wired on most lamps
CK-204 Testlight
CK-1000 Tapewire (60 feet)
Note: Throughout this guide,
the author refers to the cellar
as the place for the Jack, but
the Jack can live anywhere it
can be hidden... in front of a
staircase, in a kitchen cabinet
- If you don't have a foundation
tall enough for the jack (
more), put it somewhere else.
Real Good Toys
122 Gallison Hill Rd
Dollhouse Wiring Set
Dollhouse Wiring Set:
/
" or
3
4
The Bigger Best1 Dollhouse Wiring Set contains all
the supplies you need for wiring a 1" scale full sized
dollhouse; extend this set for even larger houses or more
intensive wiring.
Other Supplies you may wish to purchase:
Extra Tapewire and Small Hollow Eyelets to extend
the wiring (check transformer capacity)
CK-1023-6 Spring Loaded Eyelets for ceiling and
sconce fixtures (included in many fixtures)
Fixtures: There are a great many lighting components
available for your house.
ExtraBrite™ LED Striplights and Light-It-Up™ fixtures
give lots of light with very little heat for area lighting and
special uses.
Montpelier, VT 05602
Real Good Toys'
802-262-6018
www.realgoodtoys.com
kit #7999 © 05/18

Advertisement

loading

Summary of Contents for Real Good Toys Bigger Best1

  • Page 1 8-12 room house • a Quickstart Guide The Bigger Best1 Dollhouse Wiring Set contains all Begin with Confidence! the supplies you need for wiring a 1” scale full sized •...
  • Page 2 Page 2 Dollhouse Wiring Quickstart Guide Ceiling Loops that connect to the Main Loop on both ends Tools, Techniques, and Planning give extra security. It is easiest to lay the Ceiling Loop before installing the Dividers, and if Dividers are already in, a slot at the top of the Divider makes the Ceiling Loop simple.
  • Page 3 Page 3 Dollhouse Wiring Quickstart Guide Precautions Re-directs are ways to change direction without making a connection (remember: fewer connections = more reliable). 1. Tape Wire is to be used for “low voltage” application with In the diagrams you see re-directs around the doors and win- 12 volt components only.
  • Page 4 Page 4 Dollhouse Wiring Quickstart Guide Lay the Main Loop using the e-slots or stair cutouts to get from floor-to-floor. If you have an e-slot in the Base Floor, Mark for Sconce Runs run the Main Loop all the way into the cellar. using the 5 1/ 2 ”...
  • Page 5 Page 5 Dollhouse Wiring Quickstart Guide The Jack’s Connection Wire: Separate the wires and strip Making Connections: Where the Main Loop and the Base about ” of the insulation from the end of each wire. Punch a Run overlap, punch a hole in the tapewire as close to the hole in each lead of the Main Loop.
  • Page 6 Page 6 Dollhouse Wiring Quickstart Guide Finishing: Wallpaper will cover the tapewire with no other Coachlamps or wall lights on the porch are wired thru the wall before wallpaper or other interior finishing. See www. preparation. For the ceiling or painted walls, apply ‘liner pa- per’...

This manual is also suitable for:

7999