Advertisement
Instructions for kit #DH77K
13. Draw Shingling Guidelines on the Tower Roofs;
the first guideline at 1
1
/
" and the rest spaced 1" apart.
4
Glue and tape together the Tower Roofs.
Tape together Dividers to hold the Tower Roofs square
with each other as the glue dries.
When the glue is dry, take off the tape and glue
the Tower Rooftop to the Tower Roofs, cen-
tered all around (up-side-down is easier).
Assemble the Dormers
(see page 20 for painting assembled window frames)
14A. Glue together a painted Dormer Window
frame, Pediment, Stool Cap, and Triangle. Without
glue, set the window into the roof's cutout to help
the parts line up in back.
B. Glue Dormer Sides to the window assembly
lined up at the top edge of the Triangle.
Check the fit of the dormers on the house. Trim the
corners of the roof cutout for a good fit. Glue the
dormer to the roof, straight up-and-down.
Test then draw shingle guidelines (1
the outside of the Dormer Roofs.
Insert the Window Pane and glue the Dormer Roofs
together, to the Dormer Triangle, and to the Front
Roof after shingling the lower part of the Front
Roof.*
" then 1") on
1
/
4
*Builder's Note: it is easiest to
shingle the roof to here before
attaching the Dormer Roofs.
Lined up
Lined up
Pediment
Dormer Window Frame
Stool Cap
page 18
Dormer Triangle
1"
1"
1"
1"
1"
1
1
/
"
4
Advertisement
