Table of Contents
Advertisement
Do not start-up the machine if there are persons in exposed positions** within a hazardous area*.
When persons are in exposed positions (e.g. in connection with adjustment, maintenance, attachment and
uncoupling), the following conditions must be observed:
1.
The machine must be lowered to firm ground.
2.
The hydraulics must be relieved.
3.
The tractor must be stopped and the key removed from the ignition switch.
4.
The driver must ensure that no persons are staying in exposed positions during the operation.
*
Hazardous area: On and under the machine within a distance of 4 m from the machine.
**
Person in exposed position: Any person who is staying wholly or partly within a hazardous area.
Most accidents that happen in connection with the operation, transport and maintenance of machines are
caused by non-compliance with the most elementary safety conditions.
Therefore it is vital that anybody working at the machine carefully complies with the safety instructions as
well as other instructions applying to the machine.
The machine may only be operated, maintained and repaired by persons, who are familiar with this work and
who are further familiar with the possible elements of danger with this particular machine.
Instructions on Unloading and Placing
The machine is supplied completely assembled by our lorry. Our specially trained drivers will assist in the
unloading of the machine.
The machine must be driven from the lorry by means of a tractor on the ramps provided and according to our
driver's instructions.
Afterwards place the machine on level and firm ground.
ATTENTION !!
IMPORTANT !!
Disc-Roller 4,0 – 5,0 m (2-section)
Safety Instructions for DiscRoller
Rotary parts and loose clothes are a dangerous combination.
In connection with the risk of parts falling down, it may endanger
the lives of persons staying on the base frame of the machine, when
it is operated attached to a tractor.
4
16-08-2022
Advertisement
Table of Contents
