Table of Contents
Advertisement
Do not start-up the machine if there are persons in exposed positions** within a hazardous area*.
When persons are in exposed positions (e.g. in connection with adjustment, maintenance, attachment and
uncoupling), the following conditions must be observed:
1.
The machine must be lowered to firm ground.
2.
The hydraulics must be relieved.
3.
The tractor must be stopped and the key removed from the ignition switch.
4.
The driver must ensure that no persons are staying in exposed positions during the operation.
*
Hazardous area: On and under the machine within a distance of 10 m from the machine.
**
Person in exposed position: Any person who is staying wholly or partly within a hazardous area.
Most accidents that happen in connection with the operation, transport and maintenance of machines are
caused by non-compliance with the most elementary safety conditions.
Therefore it is vital that anybody working at the machine carefully complies with the safety instructions
as well as other instructions applying to the machine.
The machine may only be operated, maintained and repaired by persons, who are familiar with this work
and who are further familiar with the possible elements of danger with this particular machine.
ATTENTION !! Rotary parts and loose clothes are a dangerous combination.
IMPORTANT !! In connection with the risk of parts falling down, it may endanger the lives of
persons staying on the base frame of the machine, when it is operated attached to
a tractor.
Triple-Tiller Airy 2,5m – 4m
Safety instructions
7
20-01-2020
Advertisement
Table of Contents
