Important Notes - Tecnosicurezza TechMaster User Instructions

TechMaster

Important notes

 Before installing this product, please read carefully the installation and operating
instructions.
 Locks have been designed to correctly operate in a temperature range from -5°C to +
50°C and in an environment with non-condensing humidity between 25% and 90%.
 The lock must not be oiled/lubricated/greased.
 If installed in normal domestic or office environments, the locks do not require
maintenance; in any case, after 10,000 opening/locking cycles, it is recommended to run
a test that verifies the correct and complete operation of the product.
 Use only DURACELL™ 9 Volt Alkaline batteries, or battery holders with DURACELL™ 1.5
Volt Alkaline batteries. Alternatively, it is possible to use a 12VDC - 1A power adapter
(p.n. N1212) with relative power supply interface (p.n. T6005/W or p.n. T6005).
 A long beep together with the message "LOW BATTERY" on the display, indicate a low
battery level which need immediate replacing.
 It is strongly recommended to change the default codes before the usage and to keep
safely the new codes.
 Do never use codes easy to be guessed such as 123456, birth dates or others, based on
own personal information.
 After changing a code, perform several opening/closing tests before closing the door.
Should the lock label be removed, warranty is void.
IU_TechMaster_05_eng
!
User instructions
5 of 28