Closing Periods (Off Days) - Add New Values - Tecnosicurezza TechMaster User Instructions

TechMaster
Press on a schedule. LCD displays:
Press to confirm or
At the end of the list, press
Closing periods (OFF days) – Add new values
Closing periods are time intervals in which is possible to close the lock even when a time
lock is enabled.
It is possible to schedule up to 60 closing periods (they can be opening or closing periods).
Each one of them has a maximum time length of 14 days.
WARNING: during closing periods, the safe cannot be opened.
Enter Time Lock menu and press
Press . LCD displays:
Press . LCD displays:
Press . LCD displays:
The first one is a closing time while second one is an opening time.
Enter the time of start and the ending time for the closing period, then
press to confirm.
Should the year be set, the closing period is not repeated.
Should not the year be set (press
Press to delete all values entered.
Repeat the steps above for each closing period.
Closing periods (OFF days) – Verify or delete values
Enter Time Lock menu and press
Press until the LCD displays:
Press . LCD displays:
Press . LCD displays:
Press to check the first closing period scheduled.
Press to scroll all the scheduled closing periods.
IU_TechMaster_05_eng
to exit.
. LCD displays:
until LCD displays:
), the closing period is yearly repeated instead.
. LCD displays:
User instructions
DELETE VALUES?

END OF LIST
EXIT?
WEEKLY TIME LOCK
T1 SETTING
CLOSING PERIODS
SETTING
ADD NEW VALUES
GG/MM/AA hh:mm
GG/MM/AA hh:mm
WEEKLY TIME LOCK
T1 SETTING
CLOSING PERIODS
SETTINGS
ADD NEW VALUES
VERIFY OR DELETE
VALUES
GG/MM/AA hh:mm
GG/MM/AA hh:mm
15 of 28