Important Notes - Tecnosicurezza DigiTech User Instructions

User instructions

Important notes

• Before installing this product, please read carefully the installation and operating
instructions.
• Locks have been designed to correctly operate in a temperature range from -5°C to +
50°C and and in an environment with non-condensing humidity between 25% and 90%.
• The lock must not be oiled/lubricated/greased.
• If installed in normal domestic or office environments, the locks do not require particular
maintenance; in any case, after 10,000 opening/locking cycles, it is recommended to run
a test that verifies the correct and complete operation of the product.
• Use only DURACELL™ 9 Volt Alkaline batteries, or battery holders with DURACELL™ 1.5
Volt Alkaline batteries. Alternatively, it is possible to use a 12VDC - 1A power adapter
(p.n. N1212) with relative power supply interface (p.n. T6005/W or p.n. T6005).
• Una serie di segnalazioni acustiche durante l'apertura indicano un livello di batteria
basso. La batteria deve essere in tal caso sostituita.
• It is strongly recommended to change the default codes before the usage and to keep
safely the new codes.
• Do never use codes easy to be guessed such as 123456, birth dates or others, based on
own personal information.
• After changing a code, perform several opening/closing tests before closing the door.
Should the lock label be removed, warranty is void.
4 of 16
!
DigiTech
IU_ DigiTech_04