Code Changing; Change Code For Standard And Override Users; Change Code For Manager - Tecnosicurezza TechMaster User Instructions

TechMaster
Press . If the user is not installed LCD displays:
" " Dallas key, " " code, "+" dual mode, "TL" time lock
Press to confirm or
Enter the new user code and confirm it.
If the selected user is already installed, press
it or for leaving and selecting another user. Press

Code changing

WARNING: it is recommended to always perform this operation with door open.
Power up the keypad.
Press , then press

Change code for standard and override Users

Power up the keypad. Access Change Code menu and press
displays:
Press to confirm. LCD displays:
Enter the old code e insert the Dallas key (if set up).
Enter the new code e insert the Dallas key (if set up).
Confirm the new code e insert the Dallas key (if set up).

Change code for Manager

Power up the keypad. Access Change Code menu and press
press until LCD displays:
Press to confirm. LCD displays:
Enter the old code e insert the Dallas key (if set up).
Enter the new code e insert the Dallas key (if set up).
Confirm the new code e insert the Dallas key (if set up).
IU_TechMaster_05_eng
to exit or for switching to the next user.
until LCD displays:
to choose whether to disable it, to delete
to confirm the choice.
. LCD
. Then,
User instructions
52
INSTALL?
CHANGE CODE
CHANGE USER
CODE
ENTER OLD CODE
X X – X X X X X X
ENTER NEW CODE
X X X X X X
CONFIRM CODE
X X X X X X
CHANGE MANAGER
CODE
OLD CODE
X X X X X X
ENTER NEW CODE
X X X X X X
CONFIRM CODE
X X X X X X
21 of 28