Code Changing; User Management - Tecnosicurezza DigiTech User Instructions

DigiTech

Code changing

WARNING: it is recommended to always perform this operation with door open.
Manager (ID 01), users (ID 02-29) and override user (ID 30)
Power up the keypad. Press and hold
Enter the old code and insert the Dallas key in the reader (if set).
LCD shows:
Enter the new code. LCD shows:
Confirm the new code.

User management

Power up the keypad. Press and hold
Enter Manager code. LCD shows:
Press to scroll users list or enter user ID.
" " user installed, "_" user deleted, "X" user disabled.
The overide user (30) can only be installed when the bolt is open.
Press . If the user is not installed LCD shows the message:
" " Dallas key, " " code, "+" dual mode, "TL" time lock
Press to confirm or
Enter the new user code and confirm it. LCD shows:
If the selected user is already installed, press
to disable it, to delete it or for leaving and selecting another user.
Press to confirm the choice.
IU_DigiTech_04
. LCD shows:
. LCD shows:
to exit or for switching to the next user.
to choose whether
User instructions
ENTER OLD CODE
X X – X X X X X X
ENTER NEW CODE
X X X X X X
CONFIRM CODE
X X X X X X
USERS MANAGEMENT
0 1 – X X X X X X
02 03 04 05 06
x _ _ ✓
✓
02
INSTALL?
OPERATION DONE
9 of 16