Table of Contents
Advertisement
Quick Links
DAKE DRILL PRESS
SB-250V
INSTRUCTIONAL MANUAL
Read and understand all instructions and responsibilities before operating. Failure to follow
safety instructions and labels could result in serious injury.
Dake Corporation
Phone: 800.937.3253
www.dakecorp.com
1809 Industrial Park Dr
Fax: 800.846.3253
Grand Haven, MI 49417
Advertisement
Table of Contents
Related Manuals for Dake SB-250V
Summary of Contents for Dake SB-250V
- Page 1 DAKE DRILL PRESS SB-250V INSTRUCTIONAL MANUAL Read and understand all instructions and responsibilities before operating. Failure to follow safety instructions and labels could result in serious injury. Dake Corporation Phone: 800.937.3253 www.dakecorp.com 1809 Industrial Park Dr Fax: 800.846.3253 Grand Haven, MI 49417...
-
Page 2: Table Of Contents
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com TABLE OF CONTENTS DAKE STANDARD LIMITED WARRANTY ............2 RETURN & REFUND POLICY ................4 SPECIFICATIONS ....................5 SAFETY ........................ 6 SET UP ......................... 9 UNCRATING AND INSTALLATION ............. 9 GROUNDING INSTRUCTIONS .............. -
Page 3: Dake Standard Limited Warranty
- Serial # - Sales Order # Purchasers who notify Dake within the warranty period will be issued a Case number and/or a Return Material Authorization (RMA) number. If the item is to be returned per Dake’s request, the RMA number must be clearly written on the exterior packaging. Any item shipped to Dake without an RMA will not be processed. - Page 4 Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com Warranty Exceptions: The following conditions are not applicable to the standard limited warranty: (a) Part installation or machine service was not completed by a certified professional, and is not in accordance with applicable local codes, ordinances and good trade practices.
-
Page 5: Return & Refund Policy
Grand Haven, MI 49417 www.dakecorp.com RETURN & REFUND POLICY Thank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are here to help. Returns All Dake manufactured / distributed machines, parts and couplings include a 30-day return option. -
Page 6: Specifications
483 lbs. Max. Work Diameter In the space provided record the serial number and model number of the machine. If contacting Dake this information must be provided to assist in identifying the specific machine. Serial No. Model No. Date Purchased:... -
Page 7: Safety
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com SAFETY Carefully read all safety messages in these instructions and on your machine safety signs. Keep safety labels in good condition. Replace missing or damaged labels. Employer is responsible to perform a hazard/PPE assessment before work activity. - Page 8 Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com • Use the right tool. Do not force the tool or use the machine to do a job for which it was not designed. • Do not wear gloves, neckties, necklaces, rings, or loose clothing. Non-slip footwear is recommended.
- Page 9 Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com • Use recommended accessories. The use of improper accessories may cause risk of injury. • Adjust the table or depth stop to avoiding drilling into the table, shut off the power.
-
Page 10: Set Up
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com SET UP UNCRATING AND INSTALLATION 1. Location of the drill press should be in a well-lit area with correct power supply and that will not interfere with other machines or operations. -
Page 11: Controls
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com CONTROLS Emergency Stop Button: When this is pressed the power to the motor and controls is disconnected. The frequency drive stores energy, this will remain lit for approximately 20 seconds. -
Page 12: Operation
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com OPERATION TAPPING OPERATIONS USING REVERSE FEATURE 1. Drill the initial hole on the drill press for accuracy of diameter. If diameter is 1/2” or larger drill a pilot hole about half that diameter first. -
Page 13: Installation Of Drill Bit
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com INSTALLATION OF DRILL BIT A drill bit with a shaft of at least 1” long should be used to allow correct chuck jaw contact. If the shaft is under 1” do not insert bit as far into the chuck where it allows jaw contact with the drill flutes. -
Page 14: Feed Depth Adjustment
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com TABLE SWING ADJUSTMENT 1. To swing the table up to 360°, loosen the clamp release bolt and swing the table to the desired position. 2. After table is in the correct position, tighten clamp release bolt securely. -
Page 15: Work Holding
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com WORK HOLDING When drilling directly on the table surface it is recommended that a piece of wood or plywood be clamped securely to the table under the work piece. This will minimize splintering or burring as the drill breaks through the work. - Page 16 Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com Speed Adjustment Guide: Low Speed High Speed Middle Speed Frequency High Torque (RPM) (RPM) (RPM) 10Hz 20Hz 30Hz 40Hz 50Hz 60Hz 70Hz 80Hz 90Hz 1042 100Hz 1157 110Hz 1270...
-
Page 17: Auto And Manual Down Feed
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com Proper belt tension is approximately 10 lbs, or 1/2" of deflection. AUTO AND MANUAL DOWN FEED Manual Down Feed: With the spindle in operation and feed handle in the manual feed position pull the feed handle down to contact the work. -
Page 18: Maintenance
MAINTENANCE Special maintenance operations must be carried out by skilled personnel. However, we advise contacting DAKE. The term special maintenance also covers resetting of protection/safety equipment and devices. • On a regular basis, blow out any dust that may accumulate inside the motor (frequency depends on environment the machine is in). -
Page 19: Troubleshooting
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com TROUBLESHOOTING SYMPTOM CAUSE SOLUTION Machine not plugged in Plug in to proper receptacle Clear error by turning drill off Frequency drive has an error and back on Too long or not correct... -
Page 20: Electrical Diagrams
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com ELECTRICAL DIAGRAMS 977701V REV122021... -
Page 21: Exploded Views & Parts Lists
Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com EXPLODED VIEWS & PARTS LISTS 977701V REV122021... - Page 22 Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com Item Item Part Description Part No. Part Description Part No. Knob Spindle Pulley 301088 Handle 303872 Insert Pulley Shaft 302218 Handle Base 303876 C-Ring Ring Lock Screw Bearing 6203Z...
- Page 23 Dake Corporation 1809 Industrial Park Dr Grand Haven, MI 49417 www.dakecorp.com Item Part Description Part No. Worm Shaft (Horizontal) Bevel Gear Bearing Worm Shaft Base Screw Pulley Holder Spring Bolt Pulley 301089 Bearing Spacer Bearing Handle Washer & Snap Ring...
-
Page 24: Ordering Information
Please contact factory for current prices. ORDERING INFORMATION Parts are available for direct purchase from Dake or through a distributor. When placing a parts order, you will need to provide the part number, name of part, and model number. All parts shipped F.O.B.