Table of Contents
Advertisement
Proper belt tension is approximately 10 lbs, or 1/2" of deflection.
AUTO AND MANUAL DOWN FEED
Manual Down Feed:
With the spindle in operation and feed handle in the manual feed position pull the feed handle
down to contact the work.
Auto Down Feed:
WARNING: Be sure to set the Feed Depth Adjustment before initiating auto-feed feature.
1. With the spindle in operation, pull the feed handle out away from the drill press. This
initiates the auto down feed feature.
2. The spindle will begin to feed down.
3. If you want to stop the auto down feed move the feed handle back towards the machine
to the manual feed position and the spindle will go back up to the starting position.
977701V
16
Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
www.dakecorp.com
REV122021
Advertisement
Table of Contents
