Page 1
DAKE DRILL PRESS TB16, SB16, SB25, & SB32 INSTRUCTIONAL MANUAL WARNING! Read and understand all instructions and responsibilities before operating. Failure to follow safety instructions and labels could result in serious injury. Dake Corporation www.dakecorp.com Phone: 800.937.3253 724 Robbins Road customerservice@dakecorp.com...
- Serial # - Sales Order # Purchasers who notify Dake within the warranty period will be issued a Case number and/or a Return Material Authorization (RMA) number. If the item is to be returned per Dake’s request, the RMA number must be clearly written on the exterior packaging. Any item shipped to Dake without an RMA will not be processed.
Page 4
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com Warranty Exceptions: The following conditions are not applicable to the standard limited warranty: (a) Part installation or machine service was not completed by a certified professional, and is not in accordance with applicable local codes, ordinances and good trade practices.
Grand Haven, MI 49417 www.dakecorp.com RETURN & REFUND POLICY Thank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are here to help. Returns All Dake manufactured / distributed machines, parts and couplings include a 30-day return option.
397 lbs. 483 lbs. Weight In the space provided record the serial number and model number of the machine. If contacting Dake this information must be provided to assist in identifying the specific machine. Serial No. Model No. Date Purchased:...
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com SAFETY This is the safety alert symbol. When you see this symbol on your machine be alert to the potential for personal injury. Carefully read all safety messages in these instructions and on your machine safety signs.
Page 8
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com • Do not wear gloves, neckties, necklaces, rings, or loose clothing. Non-slip footwear is recommended. Wear protective hair covering to contain long hair. • To clamp work piece to brace against column to prevent material rotation.
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com handle are clamped tight to the column, and head and table support collars are correctly positioned. • Before switching the power on be sure the belt cover is down, and the bit is installed properly in the chuck.
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk or electrical shock. This machine is equipped with an electric cord must be used with a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com INSTALLATION OF DRILL BIT A drill bit with a shaft of at least 1” long should be used to allow correct chuck jaw contact. If the shaft is under 1” do not insert bit as far into the chuck where it allows jaw contact with the drill flutes.
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com TABLE SWING ADJUSTMENT 1. To swing the table up to 360°, loosen the clamp release bolt and swing the table to the desired position. 2. After table is in the correct position, tighten clamp release bolt securely.
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com WORK HOLDING When drilling directly on the table surface it is recommended that a piece of wood or plywood be clamped securely to the table under the work piece. This will minimize splintering or burring as the drill breaks through the work.
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com Proper drill speed for a given drill bit size: Material Type Alum. & Cast Steel Tool Steel Cast Iron Mild Steel Copper Drill Dia. 1/16” 2,445 3,665 4,890 6,110 12,225 1/8”...
Special maintenance operations must be carried out by skilled personnel. However, we advise contacting DAKE. The term special maintenance also covers resetting of protection/safety equipment and devices. • On a regular basis, blow out any dust that may accumulate inside the motor (frequency depends on environment the machine is in).
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com TROUBLESHOOTING SYMPTOM CAUSE SOLUTION Machine not plugged in Plug in to proper receptacle Clear error by turning drill off Frequency drive has an error and back on Too long or not correct...
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com EXPLODED VIEWS & PART LISTS TB-16 & SB-16: REV012019...
Page 20
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com TB-16 & SB-16: Item No. Part Description TB-16 SB-16 Base 301002 301001 Flange 301003 301004 Spring Washer (4x) 13mm 13mm Screw (M13 x 16mm L) 300999 300999 Column 301005 301006...
Page 21
Please contact factory for current prices. ORDERING INFORMATION Parts are available for direct purchase from Dake or through a distributor. When placing a parts order, you will need to provide the part number, name of part, and model number. All parts shipped F.O.B.
Page 22
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com SB-25 & SB-32: REV012019...
Page 23
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com SB-25 & SB-32: Item No. Part Description SB-25V SB-32V Base 301040 301041 Flange 301042 301043 Spring Washer (4x) 13mm 13mm Screw (M13 x 16mm L) 300999 300999 Column 301044 301045...
Please contact factory for current prices. ORDERING INFORMATION Parts are available for direct purchase from Dake or through a distributor. When placing a parts order, you will need to provide the part number, name of part, and model number. All parts shipped F.O.B.