Table of Contents
Advertisement
• Use the right tool. Do not force the tool or use the machine to do a job for which it was
not designed.
• Do not wear gloves, neckties, necklaces, rings, or loose clothing. Non-slip footwear is
recommended. Wear protective hair covering to contain long hair.
• Always use safety glasses. Also use face or dust mask if cutting operation is dusty.
• Secure work. Use clamps or vise to hold work. Do not hold parts with hands.
• Do not overreach. Keep proper footing and balance at all times.
• Maintain tools with care. Keep tools sharp and clean for best and safest performance.
• Disconnect drill press from power before servicing or changing accessories such as bits,
cutters, etc.
• Never stand on machine for risk of serious injury.
• Never leave tool running unattended. Turn power off. Do not leave machine until it comes
to a complete stop.
• Be sure drill bit or cutting tool is securely in the chuck.
• Never place your fingers in a position where they could contact the drill or cutting tool of
the work piece should unexpectedly shift.
• Never perform any operation by moving the head or table with respect to one another.
• Do not switch machine on or start any operation before checking that the head and table
lock handles are clamped tight to column, and the head and table support collars are
correctly positioned.
• Operation of the drill press incorrectly, or on a dangerous fashion can result in serious
injury or death, damage to the machine, it's components, or cutting tool.
• The drill press is designed for drilling and boring operations. Cautions is required when
operating the drill press because it can be dangerous due to the high spindle rotation
speed.
• Guards such as pully cover and chuck guard must be in place and in working condition to
prevent hazard.
• Switch the power off before setting, inspecting, lubricating, cleaning, or changing the drill
bit.
• To clamp work piece to brace against column to prevent material rotation.
• Using recommended speed for drill bit, and work piece material.
• All visitors should be kept a safe distance from work area.
• Make workshop kid proof with padlocks, master switches, or by removing the starter key.
• Reduce the risk of accidental starting. Make sure switch is in off position before plugging
in.
977701V
7
Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
www.dakecorp.com
REV122021
Advertisement
Table of Contents
