Table of Contents
Advertisement
Quick Links
DAKE HAND-OPERATED HYDRAULIC PRESS
WARNING!
Read and understand all instructions and responsibilities before operating. Failure to follow
safety instructions and labels could result in serious injury.
Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
Model 150H
INSTRUCTIONAL MANUAL
*Model 75H shown. May be slight differences.
Phone: 800.937.3253
Fax: 800.846.3253
www.dakecorp.com
customerservice@dakecorp.com
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Dake 150H
Summary of Contents for Dake 150H
- Page 1 DAKE HAND-OPERATED HYDRAULIC PRESS Model 150H INSTRUCTIONAL MANUAL *Model 75H shown. May be slight differences. WARNING! Read and understand all instructions and responsibilities before operating. Failure to follow safety instructions and labels could result in serious injury. Dake Corporation www.dakecorp.com 724 Robbins Road Phone: 800.937.3253...
-
Page 2: Table Of Contents
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com TABLE OF CONTENTS DAKE STANDARD LIMITED WARRANTY ............2 RETURN & REFUND POLICY ................4 SAFEGUARDING THE POINT OF OPERATION ..........5 SPECIFICATIONS ....................6 SAFETY ........................ 6 SET UP ......................... 8 FILLING PRESS WITH OIL ................ -
Page 3: Dake Standard Limited Warranty
Purchasers who notify Dake within the warranty period will be issued a Case number and/or a Return Material Authorization (RMA) number. If the item is to be returned per Dake’s request, the RMA number must be clearly written on the exterior packaging. Any item shipped to Dake without an RMA will not be processed. - Page 4 Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com Warranty Exceptions: The following conditions are not applicable to the standard limited warranty: (a) Part installation or machine service was not completed by a certified professional, and is not in accordance with applicable local codes, ordinances and good trade practices.
-
Page 5: Return & Refund Policy
Grand Haven, MI 49417 www.dakecorp.com RETURN & REFUND POLICY Thank you for purchasing from Dake! If you are not entirely satisfied with your purchase, we are here to help. Returns All Dake manufactured / distributed machines, parts and couplings include a 30-day return option. These policies are valid from the date of final shipment to the end user. -
Page 6: Safeguarding The Point Of Operation
ANSI B11.2 - Hydraulic Power Presses - Safety Requirements for Construction, Care, and Use It is important that Dake press users have a clear understanding of their responsibility involving the care and use of their Dake hydraulic press, including point-of-operation safe guards. Dake strongly recommends that Dake press users obtain a copy of the current American National Standard Institute (ANSI) B11.2 standard, for a more complete understanding of their responsibilities. -
Page 7: Specifications
In the space provided record the serial number and model number of the machine. This information is only found on the black and gold Dake tag shown below. If contacting Dake this information must be provided to assist in identifying the specific machine. - Page 8 Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com • This machine is intended to be operated by one person. This person should be conscious of the press ram movement not only for themselves but also for persons in the immediate area of the machine.
-
Page 9: Set Up
FAILURE TO DO SO WILL CAUSE DAMAGE TO THE HOIST. b. If a tracking problem exists, contact the Dake factory for instructions. 6. Fasten nosepiece to the end of the screw using the thumbscrew included. -
Page 10: Operation
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com OPERATION CONTROLS Hand Crank: (item 62 & 63) on the side of the press is to assist in lowering and raising the table of the press once the table pins are removed. Do not forget to replace the pins once you have the table at the desired height. -
Page 11: Maintenance
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com MAINTENANCE Recommended to replace hydraulic oil every 6 months of machine use. See “FILLING PRESS WITH OIL” section for instructions. LUBRICATION • Keep all working parts of the press well-oiled for easier operation. -
Page 12: Other Troubleshooting
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com OTHER TROUBLESHOOTING SYMPTOM CAUSE SOLUTION Oil leaking from 1) Reservoir is over filled.* 1) Drain excess oil. piston oil seal. 2) Piston Packing is worn or 2) Replace Piston Packing. -
Page 13: Exploded View & Parts List
Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com EXPLODED VIEW & PARTS LIST HANDPUMP ASSEMBLY Item Item Part Name Part No. Qty Part Name Part No. Qty Retaining Ring (3/8”) Pump Body 43972 Ball Valve (Ø1/2”) Pump Plunger... - Page 14 Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com WORKHEAD ASSEMBLY Item Item Part Name Part No. Qty Part Name Part No. Qty Pump Gasket Piston Leather 1538 (Serial No. < 192522) Reservoir 1532 Screw 2024 Packing Ring 37052...
- Page 15 Dake Corporation 724 Robbins Road Grand Haven, MI 49417 www.dakecorp.com GENERAL ASSEMBLY 907005 REV112019...
- Page 16 Cable (19’) Roller 1568 1562 Roller Shaft 1570 Cable Clamp Retaining Ring 43978 Table Spacer 1553 Flat Washer (1/4”) Dake Name Plate 81002 43631 Screw (1/4”-20 x 1/2") Handwheel 10631 43301 Screw (5/8”-11 x 3/4”) V-Block 1576 43365 Lock Washer (5/8”)
-
Page 17: Ordering Information
Please contact factory for current prices. ORDERING INFORMATION Parts are available for direct purchase from Dake or through a distributor. When placing a parts order, you will need to provide the part number, name of part, and model number. All parts shipped F.O.B.