Repainting; Battery Maintenance - Zepro ZT MK2 Installation Instructions Manual

Tail lift
Hide thumbs Also See for ZT MK2:
Table of Contents

Advertisement

Important information
1.8

Repainting

!
IMPORTANT
Piston rods and cylinder covers must not be painted. Among other things, this can damage the cylinder gaskets.
Boots, hydraulic hoses and cables may not be coated/painted as the solvent in the paint can damage the hoses and cables and
impair durability.
Picture 2. Piston rods, cyl-
inder covers and boots
1.9

Battery maintenance

When storing for longer than 1 week, it is recommended to disconnect the lift from the battery via the main
switch or by releasing the lift's main fuse, in order to reduce the risk of the battery discharging. The length of
time the vehicle can be stored without the battery charge level becoming too low depends on the condition of
the battery, the charge level prior to storage and how much power other components in the vehicle take from
the battery. After a period of storage, the battery must always be charged fully before operating the lift.
When the lift is operated repeatedly without starting or using the vehicle during lift installation or carrying out
service and repairs, use the battery charger between operations to maintain battery charge.
!
IMPORTANT
The battery charger must be disconnected when operating the lift. Risk of material damage.
www.zepro.com
Picture 3. Hydraulic hoses
ZT MK2
Picture 4. Cables
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zt 200 mk2Zt 250 mk2

Table of Contents