Table of Contents
Advertisement
Safety rules
3.2
Calculating installation dimensions (standard lift)
For easier installation it is useful to calculate and specify the necessary dimensions in advance. Efforts
should be made to install the lift as high as possible. (ZS)
The platform and 1st boom combinations are optimized for minimum total length (O). Aim to install the slide
profile in a position that allows the rear edge of the platform in the folded position to align with the rear edge
of the vehicle body. In this way, it is guaranteed that the platform can be folded out.
The easiest way to calculated the installation dimensions is to use a CAD program. 2D drawings are available
for downloading from www.c-office.com. For help with calculating installation dimensions, contact ZEPRO.
Phone: +46 (0)10-459 05 04, Email: zeprotech@hiab.com.
46
Arm
135
155
* Applies to 50 mm bavetta. With a 70 mm bavetta, dimension (B) is reduced by 20 mm.
All dimensions specified in millimetres
www.zepro.com
495
115
Total overhang (O)
Picture 9. Installation dimensions
Lifting
Slide profile
height
(length)
1356
1590
1542
1700
Length of slide profile
B
B
Lift platform
(length)
1565
989*
1765
1965
1565
1109*
1765
1965
ZT MK2
100
36
O
1669
1769
1869
1789
1889
1989
11
Advertisement
Table of Contents
