10.1 Inspection
10.1 Inspection
To always use the unit in optimal conditions, carry out routine or periodic inspections.
Inspection items
Inspection item
Installation status
Connection status
Usage conditions
10-2
Inspection details
Mounting on DIN rail,
looseness, and unit looseness
and backlash
Connector looseness
Ambient temperature (in-panel
temperature)
Ambient humidity (in-panel
humidity)
Atmosphere
Criterion
The unit must have been
installed properly.
Each connector must not be
loose.
0 to +55℃
10 to 95%RH
Free of dust and corrosive
gases
Related page
"P.4-4"
"P.6-3"
"P.11-4"
WUME-GM1H-02