Parameters In The "Connections / Connected Devices / Motion Sensor" Menu; Motion Sensors) - Sartorius Cubis MCA Series Operating Instructions Manual

System Settings
7.7.16

Parameters in the "Connections / Connected Devices / Motion Sensor" Menu

(only for connected motion sensors)
Parameter Setting Values
Number 2 gestures (left, right)*
of gestures
4 gestures (left, right,
up, down)
Any gesture
Left gesture No action
Right gesture Start / cancel taring
Up gesture Start / cancel zeroing
Down gesture
Zeroing / taring
Ionizer key
Takeover key
Left key, draft shield
Right key, draft shield
Open left (DI / DA)
Open right (DI / DA)
Open top (DI / DA)
Close all (DI / DA)
* Factory setting
76 Operating Instructions Cubis
Explanation
Activates the control of functions with 2 gestures.
Gestures: left, right.
Activates the control of functions with 4 gestures.
Gestures: left, right, down, up.
Activates the control of functions with any gesture.
Disables the functions of the motion sensor.
The gesture starts a taring process or cancels a taring process.
The gesture starts the zeroing process or cancels the
zeroing process.
Starts or ends the "Zeroing/taring" function.
If the device is equipped with an ionizer: The gesture starts
or ends the ionizer function.
Uses the gesture to start an application or adopts displayed
weight values.
If the device is equipped with a motorized draft shield:
The gesture executes the left palm key function.
If the device is equipped with a motorized draft shield:
The gesture executes the right palm key function.
If the device is equipped with a motorized draft shield:
The gesture opens the left side panel.
If the device is equipped with a motorized draft shield:
The gesture opens the right side panel.
If the device is equipped with a motorized draft shield:
The gesture opens the upper panel.
If the device is equipped with a motorized draft shield:
The gesture closes all draft shields.
MCA
®