Installing A Device With An Analytical Draft Shield Or Flat Glass Draft Shield; Positioning The Weighing Pan And Associated Components - Sartorius Cubis MCA Series Operating Instructions Manual

Installation
2
48 Operating Instructions Cubis
5.7 Installing a Device with an Analytical Draft
Shield or Flat Glass Draft Shield
5.7.1 Positioning the Weighing Pan
and Associated Components
Procedure
If this relates to a device with a pan support:
t
Place the shield plate (1) on the base of the weighing chamber (2).
t
1
Hook the pin on the pan support into the clip on the pan retainer.
t
Push the pan support down onto the pan retainer until the pan
t
support lies parallel to the device housing.
Place the weighing pan (1) onto the pan support (2).
t
1
2
MCA
®