Accessories; Printers And Communication - Sartorius Cubis MCA Series Operating Instructions Manual

Accessories

118 Operating Instructions Cubis
16 Accessories
16.1 Accessories
This table contains an excerpt of the accessories that can be ordered.
For information on other products, contact Sartorius Service.
16.1.1

Printers and Communication

Item
Thermal transfer | thermal printer
for GLP | GMP printouts on continuous
paper and labels
Thermal transfer | thermal network printer
with Ethernet connection for GLP | GMP
printouts on continuous paper and labels
Wireless nano USB adapter for company
network or independent Wi-Fi network,
e.g., operation with a Sartorius network
printer YDP30-NET (only for Europe)
Wireless nano router, e.g., for Sartorius
network printer YDP30-NET for operation
in an independent Wi-Fi network
(only for Europe)
Display cable, 3 m, for separate installation
of display and weighing units, installation
by Sartorius Service or at the factory
Installation of display cable, 3 m,
for separate installation of display and
weighing units
Cable, 3 m, between the weighing module
and electronics module for semi-
microbalance
RS232C connection cable, 9-pin, 3 m,
for connection to a PC with 9-pin COM
interface
USB QR barcode scanner
Sartorius Wedge, software for data
communication between the PC and
device
Foot switch for the draft shield "Open/
closed" functions (only in combination with
motorized draft shield), taring and printing
MCA
®
Quantity Order number
1 YDP30
1 YDP30-NET
1 YWLAN01MS
1 YWLAN02MS
1 VF4754
1 VF4016
1 YCC01-MSM3
1 VF4761
1 YBR05
1 YSW02
1 YFS02