Parameters In The "Weighing And Print Profiles / Ydp30, Pc Direct; Or Sbi Direct" Menu - Sartorius Cubis MCA Series Operating Instructions Manual

System Settings
7.7.5 Parameters in the "Weighing and Print Profiles / YDP30, PC Direct, or SBI Direct" Menu
Parameter Setting Values
GLP print Off*
On
GLP header Standard elements
or GLP footer
(if GLP print "On")
Device information
Task
Date and time
User text
Measurement
uncertainty
Weight value Standard elements
print elements
Device information
Weighing
Measurement
uncertainty
Connectors YDP30
(for YDP printer)
YDP30-NET
* Factory setting
66 Operating Instructions Cubis
Explanation
Deactivates the GLP print.
The GLP print is always switched on. All printouts contain
a GLP header and a GLP footer.
− Adds elements to or deletes elements from the GLP header:
Dashed line, space line, horizontal line, and signature.
− Changes the sequence of the individual elements.
− Adds elements to or deletes elements from the GLP header:
Device ID 1, device ID 2, package version, last calibration,
manufacturer, minUSP, model name, and serial number.
− Changes the sequence of the individual elements.
− Adds elements to or deletes elements from the GLP header:
QAPP version, task name, and user name.
− Changes the sequence of the individual elements.
− Adds elements to or deletes elements from the GLP header:
Date | time report end, date | time report start, and time zone.
− Changes the sequence of the individual elements.
− Prints an entered description, e.g., the name of the
print profile.
− Adds or deletes up to four user texts.
− Adds elements to or deletes elements from the GLP header:
Calibration certificate, accreditation, created by, date,
method, exponent, factor, process accuracy factor,
summand.
− Changes the sequence of the individual elements.
− Adds or deletes print elements: Dashed line, date | time
of application, space line, horizontal line, time zone,
and user name.
− Changes the sequence of the individual elements.
− Adds or deletes the print element "Serial number".
− Adds or deletes the following print elements: Data storage
device ID, weight value block (gross, net, and tare value
"N, T, GC"), and weight value.
− Changes the sequence of the individual elements.
− Adds or deletes the following print elements: Process
accuracy, absolute uncertainty, and relative uncertainty.
− Changes the sequence of the individual elements.
Displays the activated connector for printing.
MCA
®