Performing A Qapp Center Update - Sartorius Cubis MCA Series Operating Instructions Manual

Cleaning and Maintenance
100 Operating Instructions Cubis
9.7

Performing a QAPP Center Update

The QAPP center update can be installed from a USB mass storage device
using the device's USB-A connection. An update can also be carried out
from a server via other connectors of the device.
Requirements
− The device is switched on.
− The QAPP Center update is saved on a USB mass storage device
or on a server via a connector.
− The USB mass storage device is formatted with file system "FAT32".
Procedure
Download the QAPP center update from the Sartorius website onto
t
the USB mass storage device.
If this relates to a zip file: Unzip the QAPP center update on the stick.
t
The files must be saved at root level. The files must not be set aside
in a folder.
Insert the USB mass storage device with the QAPP center update into
t
one of the device's USB-A connections.
Select the "Install QAPP Center" menu entry in the "Settings" / "Device
t
Maintenance" menu.
Select "USB stick" as the connector.
t
Tap on the desired update.
t
Once the software update is complete: Confirm successful installation
t
with the [OK] button.
MCA
®