Sartorius Cubis MCA Series Operating Instructions Manual page 40

Operating Design
Level 1 Level 2
Device Display settings
settings
Sound (loudspeaker)
Device Update firmware
Maintenance
Install QAPP Center
Install customized
QAPP
Device data backup
Restore device data
Export device data
Import device data
Reset to factory
settings
Create
diagnostic file
40 Operating Instructions Cubis
Level 3
Display brightness
On | off switch
Color scheme
Touch sounds
Message sounds
Sound for end-of-action
List of connectors and
then list of firmware
List of connectors and
then list of QAPP Centers
List of connectors and
then list of customized
QAPPs
List of connectors
List of connectors
Role management
User management
Export overview
List of connectors for
import
Restore factory settings
MCA
®
Description
Define the brightness of the
operating display.
Activate or deactivate the "energy saving"
function.
Define the settings for the operating display
color scheme if this extension has been
configured in the QAPP Center.
Activate or deactivate the acoustic signal
when operating a button.
Activate or deactivate the acoustic signal
for messages.
Activate or deactivate the acoustic signal
for the end of an action.
− Starts a firmware update.
− Not for conformity-assessed devices.
Updates the QAPP Center using
the selected connector.
Updates a customized QAPP using
the selected connector.
Saves the device data on the selected
connector.
Loads saved device data from
the selected connector.
Saves device role management for
an administrator, user, or guest on
the selected connector.
Saves device user management for
an administrator, user, or guest on
the selected connector.
Displays the list of connectors, e.g., a server
or connected USB stick.
Loads the device data with role and user
management, e.g., from a server or
connected USB stick.
− Resets the device to factory settings
and wwdeletes all configurations.
− The audit trail and data memory
will be retained.
Save information about the device
configuration and the ongoing operation
on a connected USB stick.