Chapter 5 Parameter Objects; Pa01 (Obj. 2001H)] - [Pa44 (Obj. 202Ch)]; Pb01 (Obj. 2081H)] - [Pb92 (Obj. 20Dch)]; Pc01 (Obj. 2101H)] - [Pc90 (Obj. 215Ah)] - Mitsubishi Electric MELSERVO-JET Series User Manual

5
Parameter Objects
The objects of Parameter Objects are structured as follows. Access servo parameters other than [PV group parameters] with
Sub Index set to 00h.
Data Type Access
I32 RW
*1 Corresponds to servo parameters [Pr. PA _ _ ] to [Pr. PN _ _ ].
5.1

[PA01 (Obj. 2001h)] - [PA44 (Obj. 202Ch)]

The values of the basic setting servo parameters ([Pr. PA _ _ ]) can be obtained and set.
5.2

[PB01 (Obj. 2081h)] - [PB92 (Obj. 20DCh)]

The values of the gain/filter setting servo parameters ([Pr. PB _ _ ]) can be obtained and set.
5.3

[PC01 (Obj. 2101h)] - [PC90 (Obj. 215Ah)]

The values of the extension setting servo parameters ([Pr. PC _ _ ]) can be obtained and set.
5.4

[PD01 (Obj. 2181h)] - [PD72 (Obj. 21C8h)]

The values of the I/O setting servo parameters ([Pr. PD _ _ ]) can be obtained and set.
5.5

[PE01 (Obj. 2201h)] - [PE88 (Obj. 2258h)]

The values of the extension setting 2 servo parameters ([Pr. PE _ _ ]) can be obtained and set.
5.6

[PF01 (Obj. 2281h)] - [PF99 (Obj. 22E3h)]

The values of the extension setting 3 servo parameters ([Pr. PF _ _ ]) can be obtained and set.
5.7

[PL01 (Obj. 2401h)] - [PL72 (Obj. 2448h)]

The values of the servo motor extension setting servo parameters ([Pr. PL _ _ ]) can be obtained and set.
5.8

[PT01 (Obj. 2481h)] - [PT90 (Obj. 24DAh)]

The values of the positioning control servo parameters ([Pr. PT _ _ ]) can be obtained and set.
5.9

[PN01 (Obj. 2581h)] - [PN32 (Obj. 25A0h)]

The values of the network setting servo parameters ([Pr. PN_ _ ]) can be obtained and set.
Mapping Default

Impossible
Range Units
 
5.1 [PA01 (Obj. 2001h)] - [PA44 (Obj. 202Ch)]
Save Parameter
*1
Possible
5 Parameter Objects
5
37