Motherboard Components; Processor; Memory Support; Installing Memory - Supermicro SuperServer E102-9W-C User Manual

Hide thumbs Also See for SuperServer E102-9W-C:
Table of Contents

Advertisement

2.3 Motherboard Components

Processor

The E102-9W-C supports the Intel® Celeron 4305UE Processor.

Memory Support

The X11SWN-C motherboard supports up to 64GB of non-ECC SO-DIMM DDR4 memory
with speeds of up to 2133 MHz in two memory slots.
Note: Check the Supermicro website for recommended memory modules.

Installing Memory

Caution: Exercise extreme care when installing or removing DIMM modules to prevent
damage.
SO-DIMM Installation
1. Remove the motherboard from the chassis and carefully turn the motherboard over to
the bottom side.
2. Position the SO-DIMM module's bottom key so it aligns with the receptive point on the
slot.
3. Insert the SO-DIMM module vertically at about a 45 degree angle. Press down until the
module locks into place.
Insert this
end first
Chapter 2: Maintenance and Component Installation
Align
Press down until the
module locks into place.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sys-e102-9w-c

Table of Contents