Table of Contents
Advertisement
Chapter 5: UEFI BIOS
SR-IOV Support
Use this feature to enable or disable Single Root IO Virtualization Support. The options are
Disabled and Enabled.
BME DMA Mitigation
Enable this feature to help block DMA attacks. The options are Disabled and Enabled.
NVMe Firmware Source
Use this feature to select the NVMe firmware to support booting. The options are Vendor
Defined Firmware and AMI Native Support. The default option, Vendor Firmware, is pre-
installed on the drive and may resolve errata or enable innovative functions for the drive. The
other option, AMI Native Support, is offered by the BIOS with a generic method.
Consistent Device Name Support
Use this feature to consistently name onboard devices and slots. The options are Disabled
and Enabled.
PCIe/PCI/PnP Configuration
M.2 E-Key OPROM
Use this feature to select which firmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
M.2 M-Key OPROM
Use this feature to select which firmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
Onboard LAN1 Support
Use this feature to select which firmware to be loaded for LAN port 1 used for system boot.
The options are Disabled and Enabled.
Onboard LAN2 Support
Use this feature to select which firmware to be loaded for LAN port 2 used for system boot.
The options are Disabled and Enabled.
Onboard LAN Option ROM Type
Use this feature to select which firmware to be loaded for onboard LAN devices. The options
Legacy and EFI. Select Legacy to display and configure the onboard LAN Option ROM
features.
Onboard LAN1 Option ROM
Use this feature to select which firmware function to be loaded for LAN port 1 used for system
boot. The options are Disabled and PXE.
69
Advertisement
Table of Contents
