Table of Contents
Advertisement
5.5 Boot
Use this menu to configure boot settings:
Setup Prompt Timeout
Use this feature to specify the length of time (in seconds) for the BIOS to wait before rebooting
the system when the setup activation key is pressed. Enter the value of 65535 (0xFFFF) for
the BIOS to wait indefinitely. The default setting is 1.
Quiet Boot
Use this feature to select the screen display between POST messages or the OEM logo at
bootup. Select Disabled to display the POST messages. Select Enabled to display the OEM
logo instead of the normal POST messages. The options are Disabled and Enabled.
Boot Mode Select
Use this feature to select the boot mode. The options are Legacy, UEFI, and Dual.
Fixed BOOT ORDER Priorities
This option prioritizes the order of bootable devices that the system to boot from. Press
<Enter> on each entry from top to bottom to select devices.
•
Boot Option #1
•
Boot Option #2
•
Boot Option #3
77
Chapter 5: UEFI BIOS
Advertisement
Table of Contents
