Supermicro SuperServer E102-9W-C User Manual page 70

SuperServer E102-9W-C User's Manual
Onboard LAN2 Option ROM
Use this feature to select which firmware function to be loaded for LAN port 2 used for system
boot. The options are Disabled, PXE, and iSCSI.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Disabled and Enabled.
*If the feature above is set to Enabled, the features below will be available for
configuration:
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
IPSEC Certificate
The feature appears if Network Stack is enabled. Internet Protocol Security (IPSEC) offers
a secure connection for remote computers using a secure tunnel. The options are Disabled
and Enabled.
PXE boot wait time
Use this feature to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this feature to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.
70