Table of Contents
Advertisement
HTTP BOOT Configuration
HTTP BOOT Configuration
Http Boot One Time
Use this feature to create the HTTP boot option. The options are Disabled and Enabled.
Input the description
Highlight the feature and press enter to create a description.
Boot URI
Highlight the feature and press enter to create a boot URI.
Trusted Computing
The X11SWN-C supports TPM 1.2 and 2.0. The following Trusted Platform Module (TPM)
information will display if a TPM 2.0 module is detected:
TPM20 Device Found
Vendor:
Firmware Version:
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM support to enhance data integrity and network
security. Reboot the system for a change on this setting to take effect. The options are
Disabled and Enabled.
The following TPM information will be displayed:
•
Active PCR banks
•
Available PCR banks
*If the feature "Security Device Support" is enabled, the following features are available
for configuration:
SHA-1 PCR Bank
Use this feature to disable or enable the SHA-1 Platform Configuration Register (PCR) bank
for the installed TPM device. The options are Disabled and Enabled.
SHA256 PCR Bank
Use this feature to disable or enable the SHA256 Platform Configuration Register (PCR) bank
for the installed TPM device. The options are Disabled and Enabled.
71
Chapter 5: UEFI BIOS
Advertisement
Table of Contents
