Table of Contents
Advertisement
Chapter 5: UEFI BIOS
Graphics Configuration
Graphics Configuration
IGFX VBIOS Version 1015
IGFX GOP Version N/A
Internal Graphics
Select Auto to keep an internal graphics device installed on an expansion slot supported
by the CPU to be automatically enabled. The options are Auto, Disabled, and Enabled.
IGFX Graphic Output
Use this feature to select the preferred graphic output type. The options are VGA and
Embedded Display.
*If the feature above is set to Embedded Display, the next five features will become
available for configuration:
Panel select
Use this feature to select the panel resolution. The options are Use EDID in SPI ROM,
800x600, 1024x768, 1280x1024, 1366x768, 800x480, 1920x1080, and OEM Define.
Panel Channel Type
Use this feature to select the Panel Channel Type. The options are Disabled, Odd Chan-
nel, Even Channel, and Both Channel.
Dual LVDS Mode
Use this feature to select a single or dual mode bus for the LVDS display. The options
are Disabled, Single LVDS Bus Mode, and Dual LVDS Bus Mode.
Panel Color Depth
Use this feature to select the panel color depth. The options are Disabled, VESA and
JEIDA18 bpp, VESA 24 bpp, and JEIDA 24 bpp.
Backlight Brightness
Use this feature to select the backlight brightness for the panel display. Select a range
from 1 to 16.
GTT Size
Use this feature to set the memory size to be used by the graphics translation table
(GTT). The options are 2MB, 4MB, and 8MB.
53
Advertisement
Table of Contents
