Supermicro SuperServer E102-9W-C User Manual page 57

IOAPIC 24-119 Entries
Use this feature to enable or disable IOAPIC 24-119 entries. IRQ 24-119 may be used
by PCH devices. Disabling those IRQs may cause certain devices to fail. The options
are Disabled and Enabled.
NCT6106D Super IO Configuration

NCT6106D Super IO Configuration
Super IO Chip NCT6106D
Serial Port 1 Configuration
Serial Port 1
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This feature displays the status of a serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=3F8h; IRQ=4;), (IO=3F8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
COM Serial Port Type
Use this feature to select the COM1 port type. The options are RS232 Mode, RS422/RS485
Full Duplex Mode, and RS485 Half Duplex Mode.
Serial Port 2 Configuration
Serial Port 2
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This feature displays the status of a serial port specified by the user.
57
Chapter 5: UEFI BIOS