1. Manuals
  2. Brands
  3. Supermicro Manuals
  4. Server
  5. SuperServer E102-9W-C
  6. User manual

Supermicro SuperServer E102-9W-C User Manual page 58

Hide thumbs Also See for SuperServer E102-9W-C:
Table of Contents

Advertisement

SuperServer E102-9W-C User's Manual
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=2F8h; IRQ=3;), (IO=3F8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
COM Serial Port Type
Use this feature to select the COM2 port type. The options are RS232 Mode, RS422/RS485
Full Duplex Mode, and RS485 Half Duplex Mode.
Serial Port 3 Configuration
Serial Port 3
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This feature displays the status of a serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=3E8h; IRQ=7;), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=220h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), and (IO=228h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
Serial Port 4 Configuration
Serial Port 4
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Device Settings
This feature displays the status of a serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=2E8h; IRQ=7;), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=220h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12;), and (IO=228h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
58

Advertisement

Table of Contents
loading

Related Manuals for Supermicro SuperServer E102-9W-C

Related Products for Supermicro SuperServer E102-9W-C

This manual is also suitable for:

Sys-e102-9w-c

Table of Contents