Operation; Operating For Devices With Automatic Release - probst FTZ-MULTI Operating Instructions Manual

Operation

Example: drain kerb stones
B
7 Operation
7.1

Operating for devices with automatic release

●
The device is connected to the lifting equipment/support frame (e.g. excavator).
●
Before lifting the device, the gripping range has to be adjusted.
●
The device is placed over the product, set down, the device closes round the product and it can be lifted.
●
Set down on the ground again, the device opens automatically, the automatic release locks it into position so that the
device can be lifted without closing up.
●
Placed over the next product, the automatic release disengages itself and the product can be lifted.
●
The device therefore is a ONE-MAN-MACHINE.
Shut-down the device without lifting equipment/support frame only on even ground. The gripping arms must
be opened enough, to ensure a secure standing of the device.
Otherwise exists danger of overturning!
17 / 25
V1
B
GB