probst FTZ-MULTI Operating Instructions Manual page 53

Operation
3.) Remove the safety chain from the chain stroage box
and throw it under the lifted gripping good (ashlar rock)
 see Fig. C
Never grip with the hands under the gripping good (ashlar rock) – danger of squeezing the hands!
5.) The safety chain must fit tightly and centric to the
gripping good (ashlar rock)!  see Fig. E
Before lifting the gripping good (hard blocks) , ensure that the steel-fingergrippers have a good hold (see Figure
F) and the load is evenly distributed, otherwise there is a high danger of accidents!
Only use the handles to guide the device and bring your feet out of the danger area.
21 / 25
Fig. C
Fig. E
4.) Suspend and tighten the security chain on the other
side of the device (FTZ-multi 15) at the hook ().  see
Fig. D
The safety chain must never be used as a
"lifting tackle" to attach the device (FTZ-
multi 15) on the support frame (e.g.
excavators)!
V1
Fig. D
Fig. F
GB