Configuring Inputs And Outputs; Digital Inputs; Figure 21: Configuring Digital Inputs 1 - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-111 Telecontrol Module Compact, 2 AI
7.5

Configuring Inputs and Outputs

7.5.1

Digital Inputs

Select your TO-PASS
using the identifier. Select the input to be configured under Digital Inputs.
Digital inputs 1 ... 4 can be configured as counter inputs starting from Firmware
Version FW 2.33.
The counters count up or down from the given starting and end value.
With upward counting, exceeding of two counter values can be reported.
With downward counting, transgression of two counter values can be reported.
The parameters of the input are given on the right side.
The buttons and input fields for digital inputs 1 ... 4 and 5 ... 8 (when provided)
are identical:

Figure 21: Configuring digital inputs 1 ... 4

Manual
Version 2.0.0
®
telecontrol module from the left side of the project tree
Parameterizing 53