FEATURES FOR STAR MODELS ONLY
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
•
•
•
$CSTTX00
STAR Radio Transmit Mode = ACK When Sent to Host
$CSTTX02
ACK from base station to reader — signals a good transmission as soon as the Base
Station receives a label
ACK when sent to host — reader signals a good transmission as soon as the Base
Station has sent the label to the host
ACK from host — reader signals a good transmission as soon as the Base Station
has sent the label to the host and host has replied with an acknowledge message.
NOTE: ACK from host works only for RS-232 or USB-COM interfaces with
ACK/NACK disabled. If ACK from host is configured with any other interface
conditions, it works like ACK when sent to host.
See "Message Formatting" on page 295. for details.
NOTE: The Base Station can receive a host message only if Host Commands
Obey/Ignore ( page 35 ) is set to Ignore.
ENTER/EXIT PROGRAMMING MODE
STAR Radio Transmit Mode =
ACK from Base Station
$CSTTX01
STAR Radio Transmit Mode = ACK from Host
PRODUCT REFERENCE GUIDE
261