I 2 Of 5 Set Length 2 - Datalogic Gryphom 4500 Series Product Reference Manual

INTERLEAVED 2 OF 5 (I 2 OF 5)

I 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
156
fixed length if in Fixed Length Mode. The length includes the bar code's check and data
characters. The length can be set from 2 to 50 characters in increments of two. A setting
of 00 specifies to ignore this length (only one fixed length). See "
for more detailed programming instructions.
294
Select I 2 of 5 Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
$CI2L2

Length 2 = 50 (50 characters)
ENTER/EXIT PROGRAMMING MODE
I 2 of 5 Length Control" on page
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in Appendix D, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
Set Length 2" on page
represent-
PRODUCT REFERENCE GUIDE
157