Stand /Base Detection Behavior - Datalogic Gryphom 4500 Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Stand /Base Detection Behavior

Specifies the behavior of the reader when stationary in a stand. There are two condi-
tions which cause the reader to switch to Stand Mode/Object Detection:
•
•
Below are further options concerning Stand Operation.
Ignore Autorecognition:
Switch to Stand Mode/Object Detection:
Mode/Object Detection when the reader is placed in the stand.
Switch to Always On:
reader is placed in the stand.
Switch to Flashing:
is placed in the stand.
$CSMSD00

Stand/Base Detection Behavior =
Switch to Stand Mode/Object Detection
$CSMSD02
Stand/Base Detection Behavior = Switch to Flashing
98
GRYPHON™ I GD/GBT/GM4500
The reader is configured to switch to Stand Mode/Object Detection when station-
ary.
The reader is placed into the base station of the base station.
Disables mode switching when the reader is placed in a stand.
Automatically switches the reader to Always On mode when the
Automatically switches the reader to Flash Mode when the reader
Automatically switches the reader to Stand
Stand/Base Detection Behavior = Ignore Autorecognition
(do not change behavior)
$CSMSD01
Stand/Base Detection Behavior = Switch to Always On
$CSMSD03
READING PARAMETERS