Datalogic matrix 450N Reference Manual
  1. Manuals
  2. Brands
  3. Datalogic Manuals
  4. Barcode Reader
  5. matrix 450N
  6. Reference manual
Datalogic matrix 450N Reference Manual

Datalogic matrix 450N Reference Manual

Hide thumbs Also See for matrix 450N:
Table of Contents

Advertisement

Quick Links

See also: Manual
BSR idware GmbH
Jakob-Haringer-Str.3
A-5020 Salzburg
Web: www.bsr.at
> Matrix 450N™

Advertisement

Table of Contents
loading

Related Manuals for Datalogic matrix 450N

Summary of Contents for Datalogic matrix 450N

  • Page 1 BSR idware GmbH Jakob-Haringer-Str.3 A-5020 Salzburg Web: www.bsr.at > Matrix 450N™...
  • Page 2 Matrix 450N™ Reference Manual Ed.: 10/2016 © 2016 Datalogic S.p.A. and its Group companies  ALL RIGHTS RESERVED.  Protected to the fullest extent under U.S. and international laws. Copying or altering of this document is prohibited without express written consent from Datalogic S.p.A.

  • Page 3: Table Of Contents

    CONTENTS REFERENCES ......................vi Conventions ......................... vi Reference Documentation ................... vi Support Through the Website ..................vi Patents ......................... vi COMPLIANCE ......................vii EMC Compliance ......................vii Power Supply ....................... vii CE Compliance ......................vii FCC Compliance ......................vii EAC Compliance ......................viii LT-03x Laser Safety ....................
  • Page 4 INSTALLATION ......................47 Package Contents ...................... 47 Mechanical Dimensions ....................48 Mounting and Positioning Matrix 450N ............... 50 Mounting With EMK Mirrors ..................53 3.4.1 EMK-380 Side Mount – Standard ................54 3.4.2 EMK-380 Side Mount - Alternative ................55 3.4.3 EMK-600 Side Mount - Standard ................
  • Page 5 General Guidelines ....................147 TECHNICAL FEATURES ..................150 ALTERNATIVE CONNECTIONS ................152 Power, COM and I/O Connector ................152 Matrix 450N Lighting System Control Connector ............153 Matrix 450N GigaEthernet Connector (**) ..............155 ID-NET Network Termination ..................156 Inputs ........................156 Outputs ........................

  • Page 6: References

    Reading Methods provided as supplementary documentation on the DL.CODE mini-DVD (downloaded .zip file or mini-DVD accessory). SUPPORT THROUGH THE WEBSITE Datalogic provides several services as well as technical support through its website. Log on to www.datalogic.com and click on the Industrial Automation links for further information: ...

  • Page 7: Compliance

    European directive. Since the directives and applicable standards are subject to continuous updates, and since Datalogic promptly adopts these updates, therefore the EU declaration of conformity is a living document. The EU declaration of conformity is available for competent authorities and customers through Datalogic commercial reference contacts.

  • Page 8: Eac Compliance

    accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. EAC COMPLIANCE Customs Union: The CU Conformity certification has been achieved;...

  • Page 9: Handling

    HANDLING The Matrix 450N is designed to be used in an industrial environment and is built to withstand vibration and shock when correctly installed, however it is also a precision product and therefore before and during installation it must be handled correctly to avoid damage.
  • Page 10  do not weld the reader into position which can cause electrostatic, heat or reading window damage.  do not spray paint near the reader which can cause reading window damage.

  • Page 11: General View

    GENERAL VIEW Matrix 450N + LT-03x Figure A Device Class and Warning Labels Power On LED Bracket Mounting Holes (6) Power - Serial - I/O Connector Lens Cover MAC Address Label Lens Ethernet Connector (separate accessory) LT-03x Lighting System Ethernet Connection LED (separate accessory) HMI X-PRESS™...

  • Page 13: Rapid Configuration

    1 RAPID CONFIGURATION STEP 1 – ASSEMBLE THE READER The first step to perform is to assemble the accessories that make up the Matrix 450N reader. The lens and lighting system or external illuminator must be used. This procedure shows an LT-03x series lighting system.
  • Page 14 (see note below) Protective Film (remove before calibration) Lens Cover Locking Knobs Matrix 450N Base Figure 2 – Assembling Matrix 450N and LNS-12xx Lens NOTE: The anti-vibration components are already mounted to all Datalogic LNS-12xx Lenses.

  • Page 15: Required Accessories

    Figure 3 – Assembling Matrix 450N to LT-03x NOTE: The mating bracket can be mounted in the reverse direction to create a compact version of the Matrix 450N + LT-03x assembly. The compact assembly however will reduce access to the lens for the focusing procedure.

  • Page 16: Step 2 - Connect The System

    Use the CAB-LD-102 (no power) cable (provided with the LT-03x), to connect the communication signals between the Matrix 450N and the LT-03x while isolating the power. Through the CBX internal power switch you can control power to the Matrix 450N independently from the LT-03x.
  • Page 17 The LT-03x is powered directly from the PG-120 through the CAB-PG-0105 cable. The CAB-LD-002 (with power) cable (provided with the LT-03x), is used to supply power to the Matrix 450N from the LT-03x. Matrix 450N connects directly to the Ethernet host through the Gigabit Ethernet connection (CAB-GE0x).
  • Page 18 MATRIX 450N™ REFERENCE MANUAL CBX100/CBX500 Pinout for Matrix 450N The table below gives the pinout of the CBX100/CBX500 terminal block connectors. Use this pinout when the Matrix 450N reader is connected by means of the CBX100/CBX500: CBX100/500 Terminal Block Connectors Input Power...

  • Page 19: Step 3 - Mount And Position The Reader

    RAPID CONFIGURATION STEP 3 – MOUNT AND POSITION THE READER 1. To mount the Matrix 450N + LT-03x assembly, use the L-shaped mounting bracket to obtain the most suitable position for the reader. The most common mounting configurations are shown in the figure below. Other mounting solutions are provided in Chapter Error! Reference source not found.

  • Page 20: Step 4 - Focus The Reader

    DL.CODE configuration tool. STEP 4 – FOCUS THE READER Matrix 450N provides a built-in tool called Blue Diamonds™ to aid focusing the reader. The Blue Diamonds are accessed through the X-PRESS Interface. 1. Remove the lens cover in order to focus the reader.
  • Page 21 RAPID CONFIGURATION The procedure is as follows: a. At the correct reading distance (see the Reading Diagrams in Chapter Error! Reference source not found. of this Reference Manual), adjust the Focus ring towards the "Near position" until the Blue Diamonds are perfectly in focus, see Figure b.

  • Page 22: Step 5 - Calibrate Image Density

    MATRIX 450N™ REFERENCE MANUAL STEP 5 – CALIBRATE IMAGE DENSITY In order to function correctly to the fullest extent of its capabilities, Matrix 450N must acquire information regarding image density or PPI (pixels per inch). This calibration takes place through the X-PRESS Interface and the Focusing and PPI Setup Chart included in the package.
  • Page 23 Figure 12 – X-PRESS™ Interface: saving the parameters to memory, the Setup LED will Setup Function stop blinking and in this case Matrix 450N emits a long low pitched beep. Learn Enter the Learn function by pressing and holding the X-PRESS push button until the Learn LED is on.

  • Page 24: Step 6 - X-Press Configuration

    MATRIX 450N™ REFERENCE MANUAL STEP 6 – X-PRESS CONFIGURATION Once Matrix 450N has calibrated image density, you can configure it for optimal code reading relative to your application. This configuration can be performed either through the X- PRESS Interface or the DL.CODE configuration program.
  • Page 25 X-PRESS push button once. After a short delay the procedure is cancelled. NOTE: If you have used this procedure to configure Matrix 450N go to step The Learn procedure will not recognize the following symbologies: Postal Codes, Pharmacode, MSI, Standard 2 of 5,...
  • Page 26 All the device’s Environment parameters are reset including the default IP Address. The Matrix 450N emits 3 high pitched beeps and after a few seconds enters run mode. Any previously saved configurations on the device will remain in memory, but the Default configuration is set as the startup configuration.

  • Page 27: Step 7 - Installing Dl.code Configuration Program

    2. When the installation is complete the DL.CODE entry is created in the Start>Programs bar under “Datalogic” as well as a desktop icon. Double-click the desktop icon to run it. This configuration procedure assumes a laptop computer, running DL.CODE, is connected to a factory default reader through the Ethernet port.
  • Page 28 MATRIX 450N™ REFERENCE MANUAL The discovery feature will also show devices not belonging to the LAN and display them in grey (see Figure 17). 3. First the device must be added to the LAN by aligning its IP Address to the network. The network administrator should provide valid LAN address(es).
  • Page 29 RAPID CONFIGURATION 7. Double-click on or drag the device icon into the Selected Device Information Area. Details about the device will be displayed in this area. Figure 19 – DL.CODE Opening Window...

  • Page 30: Step 8 - Device Configuration

    MATRIX 450N™ REFERENCE MANUAL STEP 8 – DEVICE CONFIGURATION Image Setup To begin configuration, the reader must be correctly mounted at the correct reading distance for your application so that its Field of View covers the application reading area. 1. From the Task Area select Open Device Configuration. The device enters run mode and begins acquiring images.
  • Page 31 RAPID CONFIGURATION 4. Click the Image Setup button and then click the Image Auto Setup button to automatically acquire the best exposure time and gain values. 5. Select the Static or Dynamic Self-Tuning option; Start Autolearn and Apply to the Image Setup.
  • Page 32 MATRIX 450N™ REFERENCE MANUAL NOTE: For applications having multiple lighting or code reading conditions, up to 10 different Image Setups can be configured by adding them with the icon. For the next step you need to enable the Focus Calibration Tool from the Options>UI...
  • Page 33 RAPID CONFIGURATION 6. Now click on the Focus Calibration tab at the bottom of the window. The oscilloscope view is shown in the bottom panel and can be used for manual focus adjustment. The red line in the image panel above the oscilloscope must pass through the code. Click Play to enter run mode and reposition the code.
  • Page 34 MATRIX 450N™ REFERENCE MANUAL 7. Click the Acquire PPI button to automatically set Image Density so that Matrix 450N will function correctly and to the fullest extent of its capabilities. This procedure is necessary for first time installations, or if the lens type or focal distance are changed.
  • Page 35 RAPID CONFIGURATION NOTE: At this point it is probably a good idea to save the configuration from temporary memory to permanent memory giving it a specific name. 8. Now place an application specific code in front of the reader and only click the Image Auto-Setup button to register any changes in lighting or code surface contrast.
  • Page 36 MATRIX 450N™ REFERENCE MANUAL Code Setup 1. Click on the Code Setup button. By default, the Data Matrix ECC 200 symbology is enabled. If this symbology is among those in your application it will be shown in the image display with its code symbology name and a green box around it indicating it is decoded.
  • Page 37 RAPID CONFIGURATION Reading Phase 1. Select your application specific Operating Mode from the icons over the Configuration Parameters tree area: Continuous, One Shot, Phase Mode or PackTrack. 2. Configure the relative Operating Mode parameters from the Reading Phase parameters panel. Different groups will appear in the panel depending on the selected icons over the Configuration Parameters tree area.
  • Page 38 MATRIX 450N™ REFERENCE MANUAL Good Read Setup 1. Select your specific data collection type from the icons over the Configuration Parameters tree area: Code Collection, Code Combination, Presentation or Match Code. Not all data collection types are available for all Operating Modes; for example PackTrack Operating Mode only supports Code Combination.
  • Page 39 RAPID CONFIGURATION To create a logical AND condition from a logical XOR, create a new Expected Code box using the icon. Then drag the desired code icon from one box to the other. Data Formatting 1. Configure your application specific Data Formatting Message(s) from the Configuration Parameters tree area: Message 1, Message 2, etc.
  • Page 40 MATRIX 450N™ REFERENCE MANUAL Output Setup 1. Configure your application specific Digital Output(s) and Green Spot (if used) from the Configuration Parameters tree area: Output 1, Output 2, etc. NOTE: Save the configuration from temporary memory to permanent memory, overwriting the previously saved configuration.

  • Page 41: Step 9 - Test Mode

    RAPID CONFIGURATION STEP 9 – TEST MODE Use a code suitable to your application to test the reading performance of the system. Enter the Test function by pressing and holding the X-PRESS push button until the Test LED is on. Release the button to enter the Test function.

  • Page 42: Advanced Reader Configuration

    MATRIX 450N™ REFERENCE MANUAL ADVANCED READER CONFIGURATION For further details on advanced product configuration, refer to the DL.CODE User’s Guide available in the DL.CODE Help menu. Host Mode Programming The reader can also be partially configured from a host computer using the Host Mode...

  • Page 43: Introduction

    2 INTRODUCTION 2.1 PRODUCT DESCRIPTION Matrix 450N is a 5.0 megapixels 2D Imager dedicated to middle range applications in the Transportation and Logistic industry. Matrix 450N is an extremely powerful reader, capable to address ID applications never covered before by a 2D-Imager.
  • Page 44 MATRIX 450N™ REFERENCE MANUAL Standard Application Program A Standard Application Program is factory-loaded onto Matrix 450N. This program controls code reading, data formatting, serial port and Ethernet interfacing, and many other operating and control parameters. It is completely user configurable from a Laptop or PC using the dedicated configuration software program DL.CODE™, provided on the DL.CODE mini-DVD...
  • Page 45  Industrial compact 2D reader  Rugged full metal construction  Sealed circular connectors  IP65 protection class  50 °C max operating temperature  Supply voltage ranges from 10 to 30 Vdc for Matrix 450N (LT-03x requires 24 Vdc)

  • Page 46: Indicators And Keypad Button

    MATRIX 450N™ REFERENCE MANUAL 2.2 INDICATORS AND KEYPAD BUTTON Figure 21 - Indicators The following LED indicators are located on the reader: blue LED indicates that the reader is connected to the power supply (Figure 21, 1) POWER yellow LED indicates connection to the on-board Ethernet network (Figure 21, 2)

  • Page 47: Id-Net

    INTRODUCTION 2.3 ID-NET The ID-NET network is a built-in high-speed interface dedicated for high-speed reader interconnection. ID-NET is in addition to the Main and Auxiliary serial interfaces. The following network configurations are available:  ID-NET Synchronized: Single station – multiple readers ID-NET interface allows local connection of multiple readers reading different sides of the same target.
  • Page 48 MATRIX 450N™ REFERENCE MANUAL  ID-NET Multidata: Multiple stations – single readers ID-NET interface allows connection of readers reading objects placed on independent conveyors. All readers are typically located far away from each other and they can have different operating modes from each other.

  • Page 49: X-Press Human Machine Interface

    INTRODUCTION 2.4 X-PRESS HUMAN MACHINE INTERFACE X-PRESS is the intuitive Human Machine Interface designed to improve ease of installation and maintenance. Status information is clearly presented by means of the five colored LEDs, whereas the single push button gives immediate access to the following relevant functions: ...
  • Page 50 Setup LED stops blinking and Matrix 450N emits 3 high pitched beeps. If the calibration cannot be reached after a timeout of about 5 (five) seconds Matrix 450N will exit without saving the parameters to memory, the Setup LED will stop blinking and in this...

  • Page 51: Diagnostic Indication

    Learn LED will stop blinking and Matrix 450N emits 3 high pitched beeps. If the calibration cannot be reached after a timeout of about 3 (three) minutes, Matrix 450N will exit without saving the parameters to memory, the Learn LED will stop blinking and in this case Matrix 450N emits a long low pitched beep.

  • Page 52: Lens/Illuminator Selection

    LNS-1250 with anti-vibration components 93A400033 LT-031 ULTRA POWER LT SUPERNARROW WHITE 20° 2.6 ACCESSORIES The following accessories can be used with the Matrix 450N reader. Accessory Description Order No. Lenses LNS-1216 16 mm C-Mount Lens 5MP with anti-vibration components 93ACC0041...
  • Page 53 MEP-543 Photocell Kit-NPN 93ACC1728 Brackets BK-45-000 LT-03x L-shaped Mounting Bracket 93ACC0049 BK-45-010 Matrix 450N Body Mounting Bracket 93ACC0050 BK-90-040 Alternative Fixing Brackets for External Mirror (2 pcs) 93A201208 External Mirrors External Mirror – 380 mm (alternative brackets included) EMK-MTX-380 93ACC0086 External Mirror XRF410N –...

  • Page 54: Application Examples

    2.7.2 Loading/Unloading Matrix 450N can be applied in an over-the-belt style for unattended scanning in motion and also in a semi-automated style, performed in presentation mode to the overhead reader...

  • Page 55: Automated Postal Sorting

    2.7.3 Automated Postal Sorting Matrix 450N represents a real change in small item sorting applications operated through slot conveyors, like cross-belts or small drop sorters. Easier installation, easier maintenance, superior performance, longer life-cycle make Matrix 450N a unique and compelling solution for over-the-belt reading.

  • Page 56: Multimedia And Flats

    Because of the outstanding intrinsic DOF with fixed focus, it does not need any height measurement, therefore definitely simplifying the integration and eliminating any extra hardware. Low aspect ratio codes have no impact on the simplicity of the Matrix 450N reading solution, since regular image capture contains any scanning pattern inside the reading area, and therefore always the maximum level of data integrity.

  • Page 57: Static Scan

    Matrix 450N is a valid solution for scanning large stationary objects, from pallets to stacked trays. There are multiple advantages in using Matrix 450N. First of all, no parts in movement – no scan rotor and no oscillating mirror – delivers crucial advantages in terms of maximum tolerance to vibration and shock, as for example a forklift may generate.
  • Page 58 The complete set of integrated functionalities makes Matrix 450N a comprehensive solution for manual scanning, easy to deploy, easy to use and with minimum cost for maintenance.

  • Page 59: Installation

    INSTALLATION 3 INSTALLATION 3.1 PACKAGE CONTENTS Verify that the Matrix 450N reader and all the parts supplied with the equipment are present and intact when opening the packaging; the list of parts includes:  Matrix 450N reader  Quick Reference Guide ...

  • Page 60: Mechanical Dimensions

    3.2 MECHANICAL DIMENSIONS [3.86] 72.5 [2.85] Matrix 450N is designed to be used with one of the LT-03x Series Lighting Systems. In this configuration the L-shaped LT-03x mounting bracket must be used to support the whole assembly, (refer to Figure 24).
  • Page 61 INSTALLATION [7.95] 22.5 [0.89] [0.35] [1.77] [2.17] [0.20] mating bracket [4.92] reversed [5.61] M 5 x 8 n°3 compact assembly [7.05] [7.95] [0.20] [5.91] [3.54] standard assembly [1.18] Figure 24 - Matrix 450N + LT-03x + L-Bracket Overall Dimensions...

  • Page 62: Mounting And Positioning Matrix 450N

    MATRIX 450N™ REFERENCE MANUAL 3.3 MOUNTING AND POSITIONING MATRIX 450N Using the LT-03x L-shaped mounting bracket you can obtain rotation on the various axes of the reader as shown in the diagrams below: Figure 25 –Mounting LT-03x Bracket Tilt Skew...
  • Page 63 Skew Figure 27 – Matrix 450N Positioning with Two LT-03x Brackets In applications where the LT-03x Series Lighting Systems are not used, Matrix 450N can be mounted using the body mounting bracket accessory shown in the diagrams below; and you can obtain rotation on the various axes of the reader.
  • Page 64 The Pitch, Tilt and Skew angles are represented in Figure 29. Follow the suggestions below for the best orientation: Position the reader in order to avoid the direct reflection of the light emitted by the Matrix 450N reader; it is advised to assure at least 10° for the Skew angle.

  • Page 65: Mounting With Emk Mirrors

    INSTALLATION 3.4 MOUNTING WITH EMK MIRRORS Accessory EMK series External Deflection Mirrors can be mounted in all applications where it is not practical to use the full DOF of the reader. In these cases a more compact reading station can be constructed. This is particularly useful in side reading applications. The following paragraphs describe common mounting positions which help maintain reader to mirror alignment, however many variations can be constructed.

  • Page 66: Side Mount - Standard

    MATRIX 450N™ REFERENCE MANUAL 3.4.1 EMK-380 Side Mount – Standard Matrix 450N and EMK-380 Mirror alignment is maintained when the EMK is mounted directly to the frame profiles. The skew angle is made at the mirror instead of at the reader.

  • Page 67: Side Mount - Alternative

    An alternative mounting solution is to use the BK-90-040 brackets included in the package. Matrix 450N and EMK-380 Mirror alignment is obtained when the EMK is centered to the frame profiles as shown in the figures below. These brackets also provide the freedom of applying offsets to the mirror where necessary.

  • Page 68: Side Mount - Standard

    The EMK-600 mirror can be used together with two Matrix 450N readers in applications where a larger Field of View (FoV) is required. Matrix 450N and EMK-600 Mirror alignment is maintained when the EMK is mounted directly to the frame profiles. The skew angle is made at the mirror instead of at the reader.

  • Page 69: Side Mount - Alternative

    3. Rotate the mirror brackets so that the 15° skew angle slot is aligned with the profile channel, (see the figure below). 4. Mount the Matrix 450N readers through the center slots of the L- brackets to the profile. 5. Move the mirror assembly to the correct distance from the readers according to your application.

  • Page 70: Cbx Electrical Connections

    CAB-MSxx accessory cables. These accessory cables terminate in a 19-pin connector on the Matrix 450N side and in a 25-pin male D-sub connector on the CBX side. We recommend making system connections through one of the CBX connection boxes since they offer the advantages of easy connection, easy device replacement, and filtered reference signals.

  • Page 71: Power Supply

    CBX connection box, verify the jumper positions in the CBX as indicated in its Installation Manual. 4.1 POWER SUPPLY NOTE: Matrix 450N does not support sourcing power towards the CBX through the CBX "power from device" source jumper setting. Power must be supplied to the CBX as shown below.

  • Page 72: Recommended Power Supplies

    PWR-480B NOTE: If using separate power sources for LT-03x and Matrix 450N, make sure that LT-03x is powered up before Matrix 450N in order to be correctly recognized. If using customer supplied power, keep in mind the following worst case peak current consumption diagram.

  • Page 73: Main Serial Interface

    CBX ELECTRICAL CONNECTIONS 4.2 MAIN SERIAL INTERFACE CAUTION: Do not connect to the Main Interface spring clamp terminals if using Host Interface Modules (Fieldbus) with the CBX500. The signals relative to the following serial interface types are available on the CBX spring clamp terminal blocks.

  • Page 74: Rs422 Full-Duplex Interface

    MATRIX 450N™ REFERENCE MANUAL 4.2.2 RS422 Full-Duplex Interface The RS422 full-duplex (5 wires + shield) interface is used for non-polled communication protocols in point-to-point connections over longer distances (max 1200 m / 3940 ft) than those acceptable for RS232 communications or in electrically noisy environments.

  • Page 75: Id-Net Interface

    125 kbps 250 kbps 500 kbps 1Mbps Cable Length 1200 m 900 m 700 m * Application dependent, contact your Datalogic Automation representative for details. NOTE: The default ID-NET baudrate is 500 kbps. Lower ID-NET baudrates allow longer cable lengths.

  • Page 76: Id-Net Response Time

    MATRIX 450N™ REFERENCE MANUAL 4.3.2 ID-NET Response Time The following figure shows the response time of the ID-NET network. This time is defined as the period between the Trigger activation and the beginning of data transmission to the Host. Max ID-NET Response Time...
  • Page 77 CBX ELECTRICAL CONNECTIONS Figure 37 – ID-NET Network Connections with isolated power blocks...
  • Page 78 MATRIX 450N™ REFERENCE MANUAL Figure 38 - ID-NET Network Connections with Common Power Branch Network...
  • Page 79 CBX ELECTRICAL CONNECTIONS Figure 39 – ID-NET Network Connections with Common Power Star Network...

  • Page 80: Auxiliary Rs232 Interface

    MATRIX 450N™ REFERENCE MANUAL 4.4 AUXILIARY RS232 INTERFACE The RS232 auxiliary interface is available for Point-to-Point connections. When it is connected to the host computer it allows transmission of code data. The parameters relative to the aux interface (baud rate, data bits, etc.) can be defined through the Reading Phase step (Channels) in DL.CODE.

  • Page 81: Inputs

    CBX ELECTRICAL CONNECTIONS 4.5 INPUTS There are two optocoupled polarity insensitive inputs available on the reader: Input 1 (External Trigger) and Input 2, a generic input: The External Trigger can be used in One Shot Mode or in Phase Mode. Its main functions are: ...
  • Page 82 MATRIX 450N™ REFERENCE MANUAL EXTERNAL TRIGGER INPUT CONNECTIONS USING CBX POWER CAUTION: Power from the Vdc/GND spring clamps is available directly to the Input Device on the +V/-V spring clamps, and does not pass through the Power Switch (ON/OFF) inside the CBX. Disconnect the power supply when working inside the CBX.
  • Page 83 CBX ELECTRICAL CONNECTIONS Figure 43 - NPN External Trigger Using CBX Power...
  • Page 84 MATRIX 450N™ REFERENCE MANUAL EXTERNAL TRIGGER INPUT CONNECTIONS USING EXTERNAL POWER PNP Photocell Input Signal Pulled down to External Input Device Reference Figure 44 - PNP External Trigger Using External Power NPN Photocell Pulled up to External Input Device Power...
  • Page 85 CBX ELECTRICAL CONNECTIONS Input Device Power to Input Input Device Signal Input Device Reference NPN Input 2 Using CBX Power INPUT 2 CONNECTIONS USING EXTERNAL POWER Input Device Input Signal Pulled down to External Input Device Reference Figure 46 - PNP Input 2 Using External Power Input Device Pulled up to External Input Device Power...

  • Page 86: Outputs

    MATRIX 450N™ REFERENCE MANUAL 4.6 OUTPUTS Two optocoupled general purpose outputs are available. The meaning of the two outputs Output 1 and Output 2 can be defined by the user. They are typically used either to signal the data collection result.
  • Page 87 CBX ELECTRICAL CONNECTIONS OUTPUT 1 AND 2 CONNECTIONS USING CBX POWER CAUTION: Power from the Vdc/GND spring clamps is available directly to the Output Device on the +V/-V spring clamps, and does not pass through the Power Switch (ON/OFF) inside the CBX. Disconnect the power supply when working inside the CBX.

  • Page 88: On-Board Gigabit Ethernet Interface

    The on-board Gigabit Ethernet Interface can be used for TCP/IP communication with a remote or local host computer by connecting the reader to either a LAN or directly to a host PC. There is no need to use a crossover adapter since Matrix 450N incorporates an auto- cross function.

  • Page 89: Typical Layouts

    The Ethernet connection is possible in two different layouts. In a Point-to-Point layout the reader is connected to a local host by using a CAB-GE0x Gigabit Etherenet cable. There is no need to use a crossover adapter since Matrix 450N incorporates an autocross function.
  • Page 90 Host PG-120 CAB-PG-0105 Figure 53 - Ethernet Point-to-Point Layout – Continuous Mode When using a Local Area Network (LAN), one or more Matrix 450N readers can be connected to the same network by using CAB-GE0x Gigabit Ethernet cables. Alone Alone...

  • Page 91: Serial Connection

    When One Shot or Phase Mode operating mode is used, the reader can be activated by an External Trigger (for example a pulse from a photoelectric sensor) when the object enters its reading zone. Matrix 450N CAB-GE0x (for Remote Configuration and/or Data Monitor) Alone...

  • Page 92: Fieldbus Connection

    MATRIX 450N™ REFERENCE MANUAL 5.3 FIELDBUS CONNECTION In this layout a single reader functions as a Slave node on a Fieldbus network. The data is transmitted to the Host through an accessory Fieldbus interface board installed inside the CBX500 connection box.

  • Page 93: Pass-Through

    TYPICAL LAYOUTS 5.4 PASS-THROUGH The pass-through layout allows each device working Alone, to collect data from one or more pass-through input channels and send this data plus its own on one or more different output channels. In this way independent devices can be connected together in combinations to create multi device networks.

  • Page 94: Id-Net Multidata Network (Pass-Through)

    MATRIX 450N™ REFERENCE MANUAL 5.5 ID-NET MULTIDATA NETWORK (PASS-THROUGH) A special case of the pass-through layout allows each Slave device working Alone, to collect data from one or more pass-through input channels and send this data plus its own on the ID-NET output channel to the Master.

  • Page 95: Id-Net Synchronized Network

    TYPICAL LAYOUTS 5.6 ID-NET SYNCHRONIZED NETWORK When the device is working Synchronized, the ID-NET connection is used to collect data from several readers to build a multi-point or a multi-sided reading system; there can be one Master and up to 31 Slaves connected together. The Slave readers are connected together using the ID-NET interface.
  • Page 96 ID-NET terminator into the QL300 (Master) and into the last QL in the network. Figure 61 - ID-NET Synchronized Layout with Master Main Serial Interface to Serial Host Matrix 450N Master with QL300 + Matrix 450N Slaves with QL100...
  • Page 97 TYPICAL LAYOUTS Alternatively, the Master reader can communicate to the Host as a Slave node on a non TCP/IP compatible Fieldbus network (DeviceNet, Profibus, etc.). This requires using an accessory HMS Fieldbus interface board installed inside the CBX500 connection box. System configuration can be accomplished through the Ethernet interface of each individual reader using the DL.CODE configuration program.

  • Page 98: Reading Features

    Figure 63 – Reading Distance References Example: The FOV for a Matrix 450N 800-030 base using the 16 mm lens at a focus distance of 1000 mm is: = 2 [(1000 mm + 44 mm) tan (28.8°/2)] = 536 mm = 2 [(1000 mm + 44 mm) tan (24.5°/2)] = 453 mm...

  • Page 99: Reading Diagrams

    Data Matrix ECC 200 (2D code) from the Test Charts provided with the reader.  Testing should be performed with the actual Matrix 450N + LT-03x assembly using application codes in order to evaluate whether maximizing application performance requires adjustments to the HW/SW configuration with respect to the Reference Conditions given under each diagram.
  • Page 100 MATRIX 450N™ REFERENCE MANUAL Matrix 450N + LNS-1216 Code 1D 0.38 mm (15 mils) Code 1D 0.50 mm (20 mils) (cm) 140 150 (in) Reading Distance CONDITIONS: Hardware Settings Code Symbology Code 128 Code Resolution 0.38 mm (15 mils) 0.50 mm (20 mils)
  • Page 101 READING FEATURES Matrix 450N + LNS-1225 Code 1D 0.20 mm (8 mils) (cm) (in) Reading Distance CONDITIONS: Hardware Settings Code Symbology Code 128 Code Resolution 0.20 mm (8 mils) Focal Length 25 mm Aperture Stop F/5.6 Focus Distance 1.000 mm (39.4 inches) Tilt Angle 45°...
  • Page 102 MATRIX 450N™ REFERENCE MANUAL Matrix 450N + LNS-1225 Code 1D 0.33 mm (13 mils) Code 1D 0.38 mm (15 mils) (cm) 175 180 210 215 (in) Reading Distance CONDITIONS: Hardware Settings Code Symbology Code 128 Code Resolution 0.33 mm (13 mils) 0.38 mm (15 mils)
  • Page 103 READING FEATURES Matrix 450N + LNS-1225 Code 1D 0.30 mm (12 mils) Code 2D 0.61 mm (24 mils) (cm) 160 165 (in) Reading Distance CONDITIONS: Hardware Settings Code Symbology Code 128 Data Matrix ECC 200 Code Resolution 0.30 mm (12 mils) 0.61 mm (24 mils)
  • Page 104 MATRIX 450N™ REFERENCE MANUAL Matrix 450N + LNS-1225 Code 1D 0.51 mm (20 mils) (cm) 250 260 (in) 108 112 116 120 Reading Distance CONDITIONS: Hardware Settings Code Symbology Code 128 Code Resolution 0.51 mm (20 mils) Focal Length 25 mm Aperture Stop F/5.6...
  • Page 105 READING FEATURES Matrix 450N + LNS-1235 Code 1D 0.20 mm (8 mils) (cm) (in) Reading Distance CONDITIONS: Hardware Settings Code Symbology Code 128 Code Resolution 0.20 mm (8 mils) Focal Length 35 mm Aperture Stop F/11 Focus Distance 1.450 mm (57.1 inches) Tilt Angle 45°...
  • Page 106 MATRIX 450N™ REFERENCE MANUAL Matrix 450N + LNS-1235 Code 1D 0.25 mm (10 mils) Code 1D 0.30 mm (12 mils) (cm) (in) Reading Distance CONDITIONS: Hardware Settings Code Symbology Code 128 Code Resolution 0.25 mm (10 mils) 0.30 mm (12 mils)
  • Page 107 READING FEATURES Matrix 450N + LNS-1235 Code 2D 0.51 mm (20 mils) Code 2D 0.61 mm (24 mils) (cm) (in) Reading Distance CONDITIONS: Hardware Settings Code Symbology Data Matrix ECC 200 Code Resolution 0.51 mm (20 mils) 0.61 mm (24 mils)
  • Page 108 MATRIX 450N™ REFERENCE MANUAL Matrix 450N + LNS-1250 Code 1D 0.15 mm (6 mils) (cm) (in) Reading Distance CONDITIONS: Hardware Settings Code Symbology Code 128 Code Resolution 0.15 mm (6 mils) Focal Length 50 mm Aperture Stop Focus Distance 1.600 mm (57.1 inches) Tilt Angle 45°...

  • Page 109: Maximum Line Speed And Exposure Time Calculations

    The maximum (theoretical) line speed LS can be calculated as follows: X / T = LS exp (max) (max) Example: A Matrix 450N using: LT-03x Lighting Mode = Very High Power Strobe  Exposure Time ( s) = 100 Code Resolution (X) = 0.254 mm (10 mils) has a maximum line speed of: 0.254 (mm) / 0.0001 (s) = 2540 mm/s...
  • Page 110 MATRIX 450N™ REFERENCE MANUAL and LS are represented in the graph below as the curved line for X (code exp (max) (max) resolution). Values above the curve result in blurring. In practice, the application values are somewhere below the theoretical line, (in the green area), due to environmental and other conditions.

  • Page 111: Software Configuration

    SOFTWARE CONFIGURATION 7 SOFTWARE CONFIGURATION Software configuration of your Matrix 450N for static reading or simple code reading applications can be accomplished by the Rapid Configuration procedure using the X-PRESS HMI (which requires no external configuration program). This procedure is described in chapter 1 Steps 4-6.

  • Page 112: Auto Calibration

    MATRIX 450N™ REFERENCE MANUAL 7.2.1 Auto Calibration DL.CODE provides the Image Auto-Setup tool to maximize the reading performance by tuning the acquisition parameters (photometry) automatically. By selecting the Image Auto- Setup tool from the Image Setup step, the following window appears: Figure 64 –...

  • Page 113: Manual Calibration

    SOFTWARE CONFIGURATION 7.2.2 Manual Calibration The following examples show some of the typical conditions occurring during the installation and how they can be tuned manually: Under-exposure: To correct this result it is recommended to change the following parameters in their order of appearance: 1.
  • Page 114 MATRIX 450N™ REFERENCE MANUAL Over-exposure: To correct this result it is recommended to change the following parameters in their order of appearance: 1. decrease the Gain 2. decrease the Exposure Time Figure 67 - Example Over Exposure: Too Light...
  • Page 115 SOFTWARE CONFIGURATION Moving code out of the Field of View: To correct this result and have the code completely visible in FOV, it is possible to follow one or both the procedures listed below:  reposition the reader  use the Delay on Trigger and set the time value (µs). Figure 68 - Example out of FOV...

  • Page 116: Multi Image Acquisition Settings

    MATRIX 450N™ REFERENCE MANUAL 7.2.3 Multi Image Acquisition Settings When controlled variable conditions occur in the application, Multiple Image Acquisition Settings can be defined to create a database of parameter groups that handle each specific application condition. This database of pre-defined settings improves system flexibility and readiness by being applied either automatically or selectively by an activation event.
  • Page 117 SOFTWARE CONFIGURATION Automatic Image Settings Selection If we don’t know from one item to the next which reading condition will be presented, we will cycle through the pre-defined database of Image Settings (one per acquisition) in order to automatically capture the correctly lighted image over the course of several acquisitions. When the correct condition is matched, the result should be able to produce a Good Read.
  • Page 118 MATRIX 450N™ REFERENCE MANUAL External Image Settings Selection There are some applications where the lighting conditions are known before each item is read and therefore we can pre-select the correct Image Setting from an external source. When the Image Settings Selection is External, Acquisition Sequences are created and by default each Image Setting has its own Acquisition Sequence.
  • Page 119 SOFTWARE CONFIGURATION Alternatively a hybrid configuration can be made where more than one Image Setting can be grouped into an Acquisition Sequence by dragging it into the desired Sequence box. Select the empty Sequence box and delete it with the delete key. Each Acquisition Sequence can be activated exclusively by a single event, either through a string from an available communication channel or by a digital input.

  • Page 120: Image Cropping

    Image cropping is performed from the Image Setup tab by clicking on the Add Cropping Region icon as shown below. In Matrix 450N the frame rate is dependent on the number of rows and columns in the defined window. Image cropping allows reducing the Image processing area from the full FoV to a smaller area where codes are present.
  • Page 121 SOFTWARE CONFIGURATION After clicking the Add Cropping Region icon, a blue border appears which by default is equal to the FoV. By dragging the edges with the mouse (resizing) you can crop the image to a specific location where codes are present. The numbers in the blue boxes refer to pixel references. x,y coordinates of upper left corner of Cropping Region...
  • Page 122 MATRIX 450N™ REFERENCE MANUAL The cropped area can be moved by dragging the center. You can also set the cropped image size and position through the Cropping Region Area group of parameters; size = Width and Height, position = Left, Top (x,y) coordinates.

  • Page 123: Direct Part Marking Applications

    SOFTWARE CONFIGURATION 7.2.5 Direct Part Marking Applications For Data Matrix family codes the Decoding Complexity parameter is available when Processing Mode is set to Standard and selects the decoding algorithm according to the printing/marking technique used to create the symbol and on the overall printing/marking quality.
  • Page 124 MATRIX 450N™ REFERENCE MANUAL Image Filter Sets the filter to be applied to the image before being processed. This parameter can be used to successfully decode particular ink-spread printed codes (ex. direct part mark codes). Different filters can be applied to a single code or group of codes in one or more Image Settings.
  • Page 125 SOFTWARE CONFIGURATION The Open filter eliminates white areas (defects) in the dark zones of the image. Before - No Read After - Readable Open The Contrast Stretching filter maximizes image contrast. Before - No Read After - Readable Contrast Stretching...
  • Page 126 MATRIX 450N™ REFERENCE MANUAL The Histogram Equalization filter makes the gray level distribution uniform. Before - No Read After - Readable Histogram Equalization The Smoothing filter deletes small (insignificant) details in the center of the image. Before - No Read...
  • Page 127 SOFTWARE CONFIGURATION The Deblurring filter improves blurred images. Before - No Read After - Readable Deblurring The Black Enhancement filter produces a nonlinear increase in the black level for light images. Before - No Read After - Readable Black Enhancement The White Enhancement filter produces a nonlinear increase in the white level for dark images.

  • Page 128: Pass-Through Configurations

    MATRIX 450N™ REFERENCE MANUAL 7.3 PASS-THROUGH CONFIGURATIONS Starting from software version 1.3.0, DL.CODE and Matrix N family readers support pass- through multi device configurations. The pass-through configuration allows individually working devices (Alone), to collect data from other devices (also working Alone), and pass this data to a third device through a different communication channel.

  • Page 129: Internal Network Configurations

    SOFTWARE CONFIGURATION Reader #3 7.4 INTERNAL NETWORK CONFIGURATIONS Internal Network configurations (also called Master/Slave configurations), are designed to collect data from several devices connected together in an ID-NET™ network and send data output to the Host system. DL.CODE has a Net Autoset feature for the Internal ID-NET Network which automatically recognizes and assigns addresses to all connected Slave readers.

  • Page 130: Master Configuration

    MATRIX 450N™ REFERENCE MANUAL 7.4.1 Master Configuration First start with the desired device to assign as ID-NET Master (current default setting is Slave). Click on Setup Internal Network Configuration from the Task area. You will be advised that the device role will be changed to Master.
  • Page 131 SOFTWARE CONFIGURATION When finished, all the Slaves should have been correctly recognized. If not, verify all device connections and power and then repeat the operation by clicking on the Start Net Autoset button. Repeat Depending on the application, select one of the Default Internal Network Configurations: Multidata, Synchronized Phase Mode or Synchronized PackTrack.
  • Page 132 MATRIX 450N™ REFERENCE MANUAL Multidata Synchronized This selection will open a pre-configured job for the Master reader according to the selection. Follow the specific application instructions in the following paragraphs.

  • Page 133: Multidata Id-Net Network Configurations

    SOFTWARE CONFIGURATION 7.4.2 Multidata ID-NET Network Configurations The Multidata ID-NET network communications between Master and Slave are managed by the application job (configuration) using the pass-through feature. A pre-configured job is loaded with the correct pass-through settings for both the Master and Slaves when the Default Multidata Configuration is selected from the Internal Network Setting feature.
  • Page 134 MATRIX 450N™ REFERENCE MANUAL Open the Slave specific application job, (the first time it has the Master Specific name).
  • Page 135 SOFTWARE CONFIGURATION When the configuration opens, pause run mode and set all the application specific configuration parameters (including Image Setup). Verify the focus and decoding with the capture image and Code Setup page.
  • Page 136 MATRIX 450N™ REFERENCE MANUAL 3. Now save them to a new Slave specific application job Figure 71 – Saving Multidata Configuration to Slave 1 Repeat this procedure for each Slave device until the entire network is configured. The following screenshots show the pass-through configuration settings for the three devices in the example in par.
  • Page 137 SOFTWARE CONFIGURATION ID-NET Master ID-NET Slave #1 ID-NET Slave #2...

  • Page 138: Synchronized Id-Net Network Configurations

    MATRIX 450N™ REFERENCE MANUAL 7.4.3 Synchronized ID-NET Network Configurations The Synchronized ID-NET network communications between Master and Slave are internally managed by the application software. A pre-configured job is loaded with the Synchronized Layout Type and the correct Operating Mode for both the Master and Slaves when either the Phase Mode or PackTrack Configuration is selected from the Internal Network Setting feature.
  • Page 139 SOFTWARE CONFIGURATION Open the cloned application job.
  • Page 140 MATRIX 450N™ REFERENCE MANUAL When the job opens, pause run mode and configure the Slave specific parameters. These depend on the application and include the following:  photometric parameters (Image Auto-Setup feature in the Image Setup step)  Acquisition Trigger Delays necessary to avoid lighting interference between adjacent or oppositely positioned readers (Reading Phase step) ...
  • Page 141 SOFTWARE CONFIGURATION 6. Now save them, overwriting the cloned application job Figure 73 – Saving Synchronized Phase Mode Configuration to Slave Repeat this procedure for each Slave device until the entire network is configured. See par. 5.6 for an example Synchronized ID-NET configuration. An application job with the same name as the Master’s has been cloned to the Slaves.

  • Page 142: Verify Master/Slave Synchronized Configuration

    MATRIX 450N™ REFERENCE MANUAL 7.4.4 Verify Master/Slave Synchronized Configuration From the Master configuration, run the application and monitor the output data from the DL.CODE Console or a configured channel terminal. If necessary, as a troubleshooting tip, you can temporarily apply the Reading Mask field in place of each Code Content field to verify if all devices are reading.
  • Page 143 SOFTWARE CONFIGURATION 2. Run the application and monitor the output data from the DL.CODE Console or a configured channel terminal. Output Data Reading Mask The Reading Mask shows which device reads which Expected Code. The mask is composed of a fixed 32-character string (0=No Read or 1=Read) representing the 32 possible readers in an ID-NET network.
  • Page 144 MATRIX 450N™ REFERENCE MANUAL To view the connected Slave configurations: 1. Click on the Internal Network View tab at the bottom of the screen 2. Open the Master branch by clicking on the arrow to the left of the Master icon.

  • Page 145: Backup And Restore Through Dl.code

    SOFTWARE CONFIGURATION 7.5 BACKUP AND RESTORE THROUGH DL.CODE DL.CODE allows Backup and Restore to be performed to/from the configuration PC via file or to an external storage device such as BM100/BM150. DL.CODE provides complete backup and restore functions (Configuration and Environmental parameters) with the following difference: For Single Readers or individual ID-NET Slaves: ...

  • Page 146: Backup

    MATRIX 450N™ REFERENCE MANUAL 7.5.1 Backup To perform a Backup: 1. From the DL.CODE Device menu, select either Single Reader Backup (to file on PC); or Backup to external storage device. NOTE: For ID-NET network Backup (Master only), select the Backup current Internal Network configurations selection.

  • Page 147: Restore

    SOFTWARE CONFIGURATION 7.5.2 Restore To perform a Restore: 1. From the DL.CODE Device menu, select either Single Reader Restore (from file on PC); or Restore from external storage device. NOTE: For ID-NET network Restore (Master only), select the Internal Network replacement selection. If restoring an ID-NET network though the Master, this may take a few minutes.

  • Page 148: Restore Defaults

    MATRIX 450N™ REFERENCE MANUAL 7.6 RESTORE DEFAULTS The device parameters are divided into two main classes, Configuration and Environment which are affected differently by the Restore Defaults commands.  The Configuration parameters are the ones set in the various steps of the configuration process and are specific to each application.

  • Page 149: Restore Default Environment

    SOFTWARE CONFIGURATION The same action can be performed from the Device menu >Backup/Restore > Restore Defaults > Restore Default Startup Configuration. The Default Configuration will be set to run at startup and the reader will be reset. Any previously saved configurations on the device will remain in memory, but the Default configuration is set as the startup configuration.

  • Page 150: Restore Factory Defaults

    MATRIX 450N™ REFERENCE MANUAL 7.6.3 Restore Factory Defaults In order to return a device to its absolute Factory default parameters (for example device replacement) it is necessary to use the Restore Factory Defaults command. You will be prompted to confirm.

  • Page 151: Statistics

    SOFTWARE CONFIGURATION 7.8 STATISTICS Statistics on the reading performance can be viewed by enabling the Statistics panel from the DL.CODE Monitor item selected from the File menu (or Monitor icon). Figure 75 - Reading Statistics The enabled Statistical Counters can be selected from the Device>Settings>Configuration Settings menu.

  • Page 152: Bm150 Display Module Configuration And Messages

    MATRIX 450N™ REFERENCE MANUAL 7.9 BM150 DISPLAY MODULE CONFIGURATION AND MESSAGES The BM150 display module is an optional accessory for the CBX500 connection box. Although independent, it is an extension of the reader's HMI Interface, so through its keypad it provides execution of HMI features such as Test, Focus/Locate, Calibration and Code Setting.
  • Page 153 SOFTWARE CONFIGURATION View Menu (Master Only): [Exit] (returns to Main menu) Standard (displays the Standard Reading Results screen during run mode) Reading Mask (displays the Reading Mask or Reading Mask/Device State screen during run mode) depends on the selection in DL.CODE see par. 7.9.1. Network State (displays the Network State screen during run mode) Extended Menu: [Exit] (returns to Main menu)

  • Page 154: Display Messages

    MATRIX 450N™ REFERENCE MANUAL 7.9.3 Display Messages The following examples of Remote Display messages are given to help interpret the information reported. The content of these messages depends on the connected reader. Welcome Message: M M M M M M M M M M M M...
  • Page 155 SOFTWARE CONFIGURATION Diagnostic Alarms: Diagnostic error messages are sent to the BM150 display as numeric Alarm Codes, (even if Failure Messages are selected for data transmission the numeric Alarm Code is sent to the display). # X X X R R R N N N X = numeric Alarm Code (see below for the list of Alarm Codes) R = Device Network Type –...
  • Page 156 MATRIX 450N™ REFERENCE MANUAL Standard Reading Results: A A A A A A A A A A A A A X X X X X X X X X X X X X X X X X X X X...

  • Page 157: Bm150 Backup And Restore Procedure

    SOFTWARE CONFIGURATION 7.9.4 BM150 Backup and Restore Procedure The Backup and Restore functions are valid for any application layout type (point-to-point, network, etc.) using CBX500 connection boxes through the BM100 Backup module (required accessory for BM150 installation). The Backup and Restore functions are managed through the BM150 display and keypad and therefore are disabled at the BM100 Backup/Restore button.

  • Page 158: Maintenance

    MATRIX 450N™ REFERENCE MANUAL 8 MAINTENANCE 8.1 CLEANING Clean the lens cover (see Figure A, 3) periodically for continued correct operation of the reader. Dust, dirt, etc. on the lens cover may alter the reading performance. Repeat the operation frequently in particularly dirty environments.

  • Page 159: Troubleshooting

    Connect the device and click on the link to the parameter you’re interested in.  If you’re unable to fix the problem and you’re going to contact your local Datalogic office or Datalogic Partner or ARC, we suggest providing (if possible): Application Program version, Parameter Configuration file, Serial Number and Order Number of your reader.
  • Page 160 MATRIX 450N™ REFERENCE MANUAL TROUBLESHOOTING GUIDE Problem Suggestion  One Shot or Phase Mode On the Reading Phase step check the settings for using serial trigger source: Acquisition Trigger, Reading Phase-ON, the “TRIGGER” LED is not Reading Phase-OFF parameters. ...
  • Page 161 The reader Order Number consists of 9 numbers.  Order Number? The reader Order Number can be obtained by comparing the Device Model (in DL.CODE Device Menu > Settings > Settings > About Device) with the product models page on the Datalogic website.

  • Page 162: Technical Features

    10 TECHNICAL FEATURES ELECTRICAL FEATURES Power Supply Voltage 24 Vdc ± 20% Consumption (max) 2.5 A ( 0.5 A Matrix 450N; 2 A LT-03x ) see note in par. 4.1.1. Communication Interfaces Main - RS232 2400 to 115200 bit/s - RS422 full-duplex...
  • Page 163 Dimensions Matrix 450N 123 x 64 x 143 mm (4.8 x 2.5 x 5.6 in) Matrix 450N + LT-03x 202 x 213 x 179 mm (8.0 x 8.4 x 7.1 in) Weight (with lens and LT-03x) 3000 g. (6.6 lbs.)

  • Page 164: Aalternative Connections

    The connector pinouts and notes given in this appendix are for custom cabling applications. POWER, COM AND I/O CONNECTOR The Matrix 450N reader is equipped with an M16 19-pin male connector (Binder, 423 Series) for connection to the power supply, serial interfaces and input/output signals. The details of the connector pins are indicated in the following table.

  • Page 165: Matrix 450N Lighting System Control Connector

    MATRIX 450N LIGHTING SYSTEM CONTROL CONNECTOR Matrix 450N controls the LT-03x series lighting system from this connector through software. Matrix 450N can also receive power from this input, normally from the LT-03x lighting system through the CAB-LD-002 cable. Matrix 450N cannot source power through this connector.
  • Page 166 PWR-480B NOTE: If using separate power sources for LT-03x and Matrix 450N, make sure that LT-03x is powered up before Matrix 450N in order to be correctly recognized. If using customer supplied power, keep in mind the following worst case peak current consumption diagram.

  • Page 167: Matrix 450N Gigaethernet Connector (**)

    ALTERNATIVE CONNECTIONS MATRIX 450N GIGAETHERNET CONNECTOR (**) An M12 8-pin female connector is provided for the on-board GigaEthernet connection. This interface is 1000BASE-T (also known as IEEE 802.3ab) compliant. Figure 81 - M12 8-Pin Female GigaEthernet Network Connector M12 8-Pin GigaEthernet Network Connector pinout...

  • Page 168: Id-Net Network Termination

    MATRIX 450N™ REFERENCE MANUAL ID-NET NETWORK TERMINATION The network must be properly terminated by a 120 Ohm resistor at the first and last reader of the network. INPUTS There are two optocoupled polarity insensitive inputs available on the M16 19-pin connector of the reader: Input 1 (External Trigger) and Input 2, a generic input.
  • Page 169 The output signals are fully programmable being determined by the configured Activation/Deactivation events, Deactivation Timeout or a combination of the two. For further details refer to the Help On Line page for the Output Setup step in DL.CODE. Matrix 450N Ext. V+ LOAD Ext.

  • Page 170: User Interface - Serial Host

    The following wiring diagram shows a simple test cable including power, external (push- button) trigger and PC RS232 COM port connections. M16 19-pin female 9-pin D-sub female Matrix 450N Power Supply Power GND VS (10 – 30 VDC) Trigger Figure 87- Test Cable for Matrix 450N...

  • Page 171: Glossary

    GLOSSARY (Association for Automatic Identification and Mobility): AIM Global is the international trade association representing automatic identification and mobility technology solution providers. AIM DPM Quality Guideline Standard applicable to the symbol quality assessment of direct part marking (DPM) performed in using two-dimensional bar code symbols. It defines modifications to the measurement and grading of several symbol quality parameters.
  • Page 172 Depth of Field The difference between the minimum and the maximum distance of the object in the field of view that appears to be in focus. Diffused Illumination Distributed soft lighting from a wide variety of angles used to eliminate shadows and direct reflection effects from highly reflective surfaces.
  • Page 173 (International Organization for Standardization): A network of the national standards institutes of several countries producing world-wide industrial and commercial standards. LED (Light Emitting Diode) A low power electronic light source commonly used as an indicator light. It uses less power than an incandescent light bulb but more than a Liquid Crystal Display (LCD).

  • Page 174: Index

    Backup and Restore, 133 Maintenance, 146 Manual Calibration, 101 Mechanical Dimensions, 48 Model Description, 39 CBX Electrical Connections, 58 Mounting and Positioning Matrix 450N, 50 Compliance, vii Mounting with EMK Mirrors, 53 Connector Multi Image Acquisition Setups, 104 Power, COM and I/O, 152...

Table of Contents