Connect Devices; Connecting A Conductor To The Cage Clamp; Figure 9: Connecting A Conductor To A Cage Clamp - WAGO 750-614/040-000 Manual

Potential distribution; extreme
Table of Contents

Advertisement

32

Connect Devices

Pos : 55 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Pos : 56 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 1/Geräte ansc hließ en - Übersc hrift 1 @ 3\mod_1234172889468_21.doc x @ 27460 @ 1 @ 1
5
Connect Devices
Pos : 57 /All e Seri en (Allgemei ne Module)/Sicher heits- und s ons tige Hi nweis e/Gefahr/Gefahr: Lei tungen nur i n s pannungsfr eiem Zus tand ans chli essen oder trennen @ 16\mod_1372153982130_21.doc x @ 124277 @ @ 1
Only connect or disconnect lines when power is safely isolated!
The lines to the device can carry hazardous voltages and currents. Contact with
the lines when live can result in severe injury or death. Therefore, read and
observe the following safety rules before you perform work on the device:
1.
Disconnect the respective system component from the power supply.
2.
Secure the system component against unintentional restart.
3.
Check if the voltage is positively isolated.
Pos : 58 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1
5.1

Connecting a Conductor to the CAGE CLAMP

The WAGO CAGE CLAMP
finely stranded conductors.
Only connect one conductor to each CAGE CLAMP
Only one conductor may be connected to each CAGE CLAMP
Do not connect more than one conductor at one single connection!
If more than one conductor must be routed to one connection, these must be
connected in an up-circuit wiring assembly, for example using WAGO feed-
through terminals.
1.
For opening the CAGE CLAMP
above the connection.
2.
Insert the conductor into the corresponding connection opening.
3.
For closing the CAGE CLAMP
now clamped firmly in place.

Figure 9: Connecting a Conductor to a CAGE CLAMP

Manual
Version 1.1.0
750-614/040-000 Potential Distribution XTR
®
connection is appropriate for solid, stranded and
®
insert the actuating tool into the opening
®
simply remove the tool. The conductor is
®
WAGO-I/O-SYSTEM 750 XTR
®
®
!
®
.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Potential distribution xtr

Table of Contents