Husqvarna Rider 13 AWD Workshop Manual page 80

3. Drain out the oil if necessary, two plugs.
4. Mark the hydraulic hoses and release
from the underside of the rear axle. Fit
the protective plugs. A small amount of
oil will leak out even if the axle has not
been drained.
5. Release the return hose from the
hydraulic tank. Open the clamp for the
suction hose under the tank and remove
the hydraulic tank.
REPAIR INSTRUCTIONS
Oil drainage
Hydraulic hoses underside
Opening the clamp
8009-832
8009-833
8009-834
79
English-