DELIVERY AND DEALER SERVICE
Check that the cutting unit works and that no
unusual sounds are heard.
Using the lever, the cutting height can be
adjusted in 7 different positions.
Engine Speed Regulator
Check that the engine's max. speed is
adjusted at:
Max speed
Rider 13 AWD
2900–3100 rpm 1500 rpm
Rider 15V2 AWD 2825–2975 rpm 1500 rpm
Rider 155 AWD
2825–2975 rpm 1500 rpm
Inspecting the muffler
Check that the muffler is fitted securely. Tem-
perature variations and vibrations can mean
that the tightening torque for the screws
drops. The screws should be checked to
ensure the correct tightening torque. The
check should be made after test running as
any paint will then be burnt off. The tightening
torque should be approximately 10 Nm.
!
WARNING!
The muffler gets very hot in use
and remains so for a short time
afterwards. Contact can result in
burns. Remember the risk of fire.
22
English-
Cutting height setting
Idling
Mounting bolts muffler
6004-013H
8009-683