Rinse Sentry; Alarm Notifications - Champion DH6000 Operation, Cleaning, And Maintenance Manual

Operation

Rinse Sentry

• This machine is equipped with a Rinse Sentry Feature that monitors the booster temp-
erature during the wash cycle and will extend the wash cycle time until a minimum of 180°F
is achieved in the tank. Once achieved, the machine will complete the wash cycle and
perform a final rinse.
Alarm/Notifications
"CHECK DRAIN" ALARM
CHECK DRAIN
Touch to Change
WASH TEMP
Condition:
The dishwasher has stopped lling.
Cause:
The machine has lled for 6 minutes but has not lled.
:
Solution
• Check the wash tank upper oat for something jamming it.
TO RESET THIS ALARM:
Push the 'CHECK DRAIN' button once the problem is xed.
Call service if the machine continues to alarm.
"CHECK THERMISTOR" ALARM and LOCKOUT
WASH TEMP
Condition:
The dishwasher operation is locked out.
Cause:
A temperature sensing thermistor has a problem.
:
Solution Contact the service agent for repair.
8
Condition:
Cause:
Solution
• Check the wash tank lower oat to see if it is jammed.
TO RESET THIS ALARM:
Push the 'CHECK FLOATS' button once the problem is xed.
Call service if the machine continues to alarm.
THERMISTOR
CALL FOR
SERVICE
Condition:
Cause:
TOUCH THE SCREEN TO WAKE THE MACHINE.
"CHECK FLOATS " ALARM
CHECK FLOATS
WASH TEMP
The dishwasher has stopped operation.
The upper oat is up but the lower oat is not made.
:
"SLEEP " MODE
Touch to Change
SLEEP
Dishwasher is o ; all heaters are disabled.
The machine was idle for user programmed time.