Machine Controls
The pressure gauge is located at the top of the machine. The control panel is located on the
front left side of the lower panel.
A - Pressure Gauge - Displays the incoming water pressure.
B - Latch - Locks the doors during a cycle.
C - Green Push Button Power Switch - Powers off display, heaters and opens drain.
D - Digital Touchscreen Display - shows machine status and time cycle selections.
Main Touchscreen Display
SELECT CYCLE
Touch to Change
1
WASH TEMP
4
150
3
Select a 1, 2, 4, or 6 minute wash cycle.
1
Status window shows the machine operation
2
state such as, FILLING, READY etc.
Settings Icon accesses data and maintenance
3
menus.
Temperature display window shows wash and
4
final rinse temperatures.
5
Time Remaining area shows the elapsed time
for the Rinse, Dwell, and (Recovery cycles VHR
only).
2
READY
5
TIME REMAINING
Operation
A
B
C
D
DH6000T-VHR
A
C
D
DH6000
3