Changing Cycle Times - Champion DH6000 Operation, Cleaning, And Maintenance Manual

11
1 MIN CYCLE
Touch to Change
WASH TEMP
150
The display returns to READY at the
end of the 1 MIN CYCLE. Open the
doors, and remove the rack of clean
wares.
Caution:
Wares may be hot after washing. Be careful when removing wares.

Changing Cycle Times

• Starting a Dishwasher Cycle
A cycle time must be selected before closing the doors to start a cycle.
When "SELECT CYCLE' is displayed, the operator can open and close the doors without
starting another cycle. Pushing 'Select Cycle' and closing the door starts a cycle.
• Changing from a short cycle to a longer cycle.
Entering a longer wash cycle when a shorter cycle is running will extend the wash cycle.
• Changing from a long cycle to a shorter cycle while washing.
Entering a shorter cycle when a longer cycle is running will stop the longer cycle and
the short cycle will complete its time.
SELECT CYCLE
Touch to Change
WASH TEMP
150
When displayed, Select Cycle must be
pressed to begin a cycle.
READY
READY
TIME REMAINING
1 MIN CYCLE
Touch to Change
WASH TEMP
150
Cycle can be changed when the
dishwasher is in cycle.
Operation
RINSING
180
7