Ec Declaration Of Incorporation For Machines Atex Hp4 Without Heating Cartridge - ProMinent Hydro/4 HP4a Operating Instructions Manual

EC Declaration of Incorporation for Machines ATEX HP4 without heating cartridge

21 EC Declaration of Incorporation for Machines ATEX HP4
without heating cartridge
Tab. 13: Extract from the EC Declaration of Incorporation
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Only start up the pump when it has been established that the machine into which the pump has been installed corre‐
sponds to the provisions of the Machine Directive.
EX-designation:
Assess the ignition risk when combining the pump and motor.
Date:
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the relevant
basic health and safety requirements of the EC Directive on the basis of its
functional concept and design and in the version marketed by us. Tech‐
nical documents were produced in line with Appendix VII Part B.
Any modification to the product not approved by us invalidates this decla‐
ration.
Metering pump without motor, product range Hydro 4
Design for use in areas at risk of explosion in accordance with the ATEX Direc‐
tive (2014/34/EC)
HP4a - - - - - - - - - - - - - - § A -% &
with the characteristic
§ = "1" or "3" or "4"
% = "0" or "K" or "1" or "2" or "A" or "B" or "C" or "D"
& = "0" or "1"
see nameplate on the device
EU ATEX Directive (2014/34/EU)
EC Machinery Directive (2006/42/EC)
EU EMC Directive (2014/30/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the
of the Machinery Directive 2006/42/EC
EN ISO 80079-36:2016, EN ISO 80079-37:2016
EN ISO 12100:2010, EN 809:1998+A1:2009
EN 61000-6-2:2005, EN 61000-6-4:2007/A1:2011
EN 60204-1:2006/A1:2009
II 2G Ex h IIC T4 Gb X for % = "0" or "K"
II 2G Ex h IIB T4 Gb X for % = "1", "2", "A", "B", "C", "D"
X: maximum medium temperature 90 °C
Ambient temperature -10 ... +40 °C
16.11.2018
You can download the Declaration of Incorporation at www.promi‐
nent.com.
107