Ec Declaration Of Incorporation For Atex Hp2 Machines - ProMinent Hydro 2 Series Operating Instructions Manual

Metering pumps
Table of Contents

Advertisement

22

EC Declaration of Incorporation for ATEX HP2 Machines

For pumps with explosion protection:
Tab. 23: Extract from the EU Declaration of Incorporation
Designation of the product:
Product type:
Serial number:
Relevant directives:
Harmonised standards applied, in
particular:
Only start up the pump when it has been established that the machine into which the pump has been installed com‐
plies with the provisions of the Machine Directive.
EX-designation:
Assess the ignition risk when combining the pump and motor.
Date:
EC Declaration of Incorporation for ATEX HP2 Machines
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
n
hereby declare that the product specified below complies with the relevant
basic health and safety requirements of the EC Directive on the basis of its
functional concept and design and in the version marketed by us. Tech‐
nical documents were produced in line with Appendix VII Part B.
Any modification to the product not approved by us invalidates this decla‐
ration.
Metering pump without motor, product range Hydro 2
Design for use in areas at risk of explosion in accordance with the ATEX Direc‐
tive (2014/34/EC)
HP2a - - - - - - - - - - - - - - § A - 0 &
with the characteristic
§ = "1" or "3" or "4"
& = "0" or "1" or "3"
see nameplate on the device
EU ATEX Directive (2014/34/EU)
EC Machinery Directive (2006/42/EC)
EU EMC Directive (2014/30/EU)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the
Machinery Directive 2006/42/EC
EN ISO 80079-36:2016, EN ISO 80079-37:2016
EN ISO 12100:2010, EN 809:1998+A1:2009+AC:2010
EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011
EN 60204-1:2006+A1:2009
II 2G Ex h IIC T4 Gb X for & = "0" or "1"
X: maximum medium temperature 90 °C, ambient temperature -10 ... +40 °C
II 3G Ex h IIB T4 Gc X for & = "3"
X: maximum medium temperature 90 °C
16.11.2018
You can download the Declaration of Incorporation at www.promi‐
nent.com.
113

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents