Rice Lake SCT-2200 Quick Setup Manual
Fieldbus, devicenet setup
Hide thumbs
Also See for SCT-2200:
- Technical manual (84 pages) ,
- Quick setup manual (2 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Quick Links
SCT-2200 Fieldbus
™
DeviceNet
Electrical Diagram
CONSUMPTION:
50W max
Note
Module Connection to SCT-2200 Transmitters
Use the RJ45 and RS-485 directional ports to connect the DeviceNet Fieldbus Module to one or more SCT-2200
RJ45
RJ45
RS-485
RS-485
FIELDBUS
DeviceNet
July 12, 2019
Quick Setup Guide
GND
CANL
NC
CANH
NC
EARTH
GND
12/24 VDC
+Vdc
B(-)
B(-)
A(+)
A(+)
RJ45
RS-485
SCT-2200 01
ERR STS PWR
8
RJ45
B (-) 5
RS-485
A (+) 4
1
8
RJ45
B (-) 5
RS-485
A (+) 4
1
Up to 16 SCT-2200
units can be
connected.
B(-)
B(-)
A(+)
A(+)
RJ45
RS-485
It is recommended
equipment be powered
Note
by a 12-24 VDC LPS or a
Class 3 power source
RJ45
RJ45
RS-485
RS-485
SCT-2200 n
PN 192847
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rice Lake SCT-2200
Summary of Contents for Rice Lake SCT-2200
- Page 1 RS-485 A (+) 4 12/24 VDC +Vdc Module Connection to SCT-2200 Transmitters Use the RJ45 and RS-485 directional ports to connect the DeviceNet Fieldbus Module to one or more SCT-2200 Up to 16 SCT-2200 units can be connected. B(-) B(-)
- Page 2 The weight transmitter menu is used to configure the DeviceNet Module. 1. Reboot the weight transmitter. 2. Press the key while the display check is in progress to access the menu: Refer to the SCT-2200 Fieldbus technical manual (PN183523) for full parameter details. Note Parameter Descriptions Enables HUB mode Sets the ...
- Page 3 Digital output 2 status (0 = OFF; 1 = ON) 00 Hex 01 Hex 02 Hex 03 Hex (LSB) Bit 0 Digital output 1 status (0 = OFF; 1 = ON) (LSB) © Rice Lake Weighing Systems ● All Rights Reserved...
- Page 4 DeviceNet Quick Setup Guide Input Data (for data reading) - Hub Mode DATA* DESCRIPTION/EXAMPLE Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Bit 7 Scale present bit (Fixed value = 1) Bit 6/5 Progressive command loop counter;...
- Page 5 0A Hex 00 Hex (MSB) 00 Hex (LSB) Second parameter of the command. 03 Hex (MSB) Parameter is always expressed in absolute mode (no decimals, no E8 Hex (LSB) sign). (LSB) © Rice Lake Weighing Systems ● All Rights Reserved...
- Page 6 DeviceNet Quick Setup Guide Calibration Procedure DESCRIPTION EXAMPLE Byte Value Description 1. Send command 23 Hex to the transmitter to adjust calibration (transmitter ID has to 03 Hex Transmitter n. 3 23 Hex Command Byte Value Description 03 Hex Transmitter n. 3 1D Hex Change page 2.
- Page 7 Solid or blinking red – no communication with the fieldbus master; check the cable connection, protocol and the PLC configuration All LED annunciators turn on during the fieldbus module start-up to verify correct functioning. Note © Rice Lake Weighing Systems ● All Rights Reserved...
- Page 8 Specifications subject to change without notice. Rice Lake Weighing Systems is an ISO 9001 registered company. 230 W. Coleman St. • Rice Lake, WI 54868 • USA U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319...
Need help?
Do you have a question about the SCT-2200 and is the answer not in the manual?
Questions and answers