Table of Contents
Advertisement
Installing a Plywood Base
A plywood base is recommended when installing the switch on a wall that
has wooden studs. Refer to "Plywood Base" on page 61. Consult a
qualified building contractor for installation instructions for the plywood
base. The installation guidelines are listed here:
You should use a stud finder to identify the middle of studs and hot
electrical wiring in the wall.
You should attach the base to two wall studs with a minimum of
four screws.
The selected wall location for the base should provide sufficient
space from other devices or walls so that you can access the front
and back panels, and for adequate air flow for ventilation.
x220 Series Installation Guide
63
Advertisement
Table of Contents
